Pipe Cutter Tool 3/16"-2" OD, Heavy Duty Metal Pipe Cutter With Deburring Tool Pipe Reamer Sharp Copper Tube Cutter Speed Cutting Tubing Cutter For Stainless Steel Aluminum Brass Pipe

This thing works great. I bought two different styles, the other one from another company looked really sturdy but the blade was inferior causing it to require way too much effort. This device on the other hand has a sharp blade and the rollers accommodate different pipe sizes much better. The deburring tool is also not bad, it will knock down obvious stuff.

Tool worked perfectly. Constructed nicely and great price point.

Needed a tubing cutter to handle up to 1" and this one looked better than a different one I had ordered a couple days ago. The first order worked but not well on 1" so this one got put to the test. It cut the 1" PVC like butter and left a very nice, square end. It even came with an "inside/outside" reamer to clean up the edges of the tubing after the cut and that worked very well too. This thing is very rugged, fits 1 1/4" PVC's OD well and cuts it very square as well even though it's intended for metal tubing. Now, I tested it on some copper, steel and aluminum tubing scraps I had laying around (up to 1" size) and it cut the metal like butter. Even though it isn't cheap, the rugged construction makes it easier to use and it cuts all the sizes and types of tubing I need it to so IMO it's going to be great to use and if I ever do manage to break it, I won't hesitate to order another one, even if they should raise the price (hope not though).

I needed to make a couple dozens cuts in 19mm OD aluminum tube for a project, and I was nervous about getting a cheap plastic no-name Chinese tool like this, but for the cost, I figured if it lasted long enough to finish this one project, it'd be worth the money. And the good news is yeah, a couple dozens cuts through aluminum tube and it's still going strong. Every cut was clean and easy and square. One thing to note is that there is a subtle flare out on the tubes after the cut. Fraction of a millimeter, but enough to interfere with my application. This may be a property of how all of these kinds of cutters work, not just this specific one, I don't know. But a couple seconds of twisting with the included chamfer tool was enough to knock down the flaring enough for my purposes. I don't know how this would hold up against cutting something like steel, but softer metals like aluminum or copper seem to be no problem. The all-plastic construction gives me doubts in regards to its longevity, but I just needed it to get me through one project and it rocked it, so I'm alright with the money I spent.

Had never used a pipe cutter before. Used this to dismantle a soccer goal someone had tossed on my property. (Who? Why there?) Worked surprisingly well. Each cut took less than a minute. Put the pieces in the trash bin.

I have used this to cut some steel fence posts, as well as some copper and brass tubing for home projects. I used a hacksaw to make the first cut in the fence post, and immediately ordered this after, it is absolutely worth the money. Now I take my sweet time with this tool, cranking it down causes the pipe to pinch in and imagine that'd also significantly cut down on joint and blade lifetime, but it will cut a steel fence posts in a minute or two without working up a sweat, and softer metals are even easier. Definitely beats using a hacksaw. I have noticed that if I keep going in one direction it tends to wander a few millimeters before really biting in to the metal, and that was important to me in a particular case, so go back and forth for a few laps until the blade makes a good groove. Overall, I'm saying buy a pipe cutter,

Good for 1.50 inch tubing. Soft metals work best. Does roll the edge. Tool that comes with it to chamfer is worthless. Overall good product for price.

Right out of the box this cutter looks like a beast. I was sadly disappointed after just the first use. I needed to cut down the steel pipe on my sink tailpiece and this thing just spun around it like a dancer on a pole (good thing it looks so fancy). The grip to tighten is useless- just a thin piece of rubber that spins freely between that and the lack of a sharp wheel, you can’t tighten down enough to bite into anything substantial. Might work okay on pex or pvc, but did not impress me with the metal pipe. This thing is HUGE, bulky and borderline obscene for a cutter. Definitely not going to be taking it into any tight spaces with the size it is. Not worth $25 for something that can’t be used like it should.

Prodotto valido e robusto. Consigliato Unica nota, che penso valga per tutti gli attrezzi simili, i tubi che hanno uno spessore sottile, tipo canotti di ottone per sifoni, sono riuscito a tagliarli solo inserendo al loro interno un tubo di legno (tipo manico di scopa) di diametro più vicino possibile a quello interno del tubo da tagliare. Senza questo accorgimento la lama piega il tubo, lo deforma e non riesce a tagliarlo.

初めて使用しましたが、 太さ3.5cm、厚さ1.5mmのステンレスが簡単に切れました。 レビューで、切れないとか、すぐ歯が欠けるとかありますが、切れないのは締め付け不足、歯が欠けるのは、締め付けすぎか、性急に締めていったためかと思います。 私は10〜20回転ごとに少しづつ増し締めし、150回転くらいで綺麗に切れました。所要時間は一本2分くらい。 モノタロウのサイトにわかりやすい使い方が書いてあります。

This was good to start but after around 30 x 15mm copper cuts wheel has come loose and no longer cuts! It wonders to oneside. Cannot return due to 30 day window. No impressed.

I bought it to cut 1-1/4'' Tailpiece pipe for under sink drainage. It cut it without any hesitation. It took only8-12 turns around. Very effective and easy to use tool. I recommend it for DIY.

Sieht sehr ergibt aus und macht einen guten Eindruck. Noch nicht im Gebrauch gehabt aber gut einen Rohrschneider daheim zu haben