HD Backup Camera,Metal Housing 170 Degree Wide View Angle License Plate Rear View Camera for Car,Clear Night Vision IP69 Waterproof Rearview Universal Reverse Cam Kit for Vehicle SUV RV Pickup

Solid back-up camera. Comes with an 8 meter RCA + Power cable, and the camera side has its own cable which is also about a meter long. I've installed 2 of these now on full size trucks. I like that the license plate bracket tucks behind the license plate so the install looks tidy and clean. The only feature I can't commend on is the AHD resolution as neither of the head units I used support it. However the "normal" lower resolution looks good. The night vision is effective. The only suggestion I would make for improvement is to also include a ground along with the power on the 8 meter cable. As it comes you either need to ground the camera somewhere within about a meter of where you mount it, or you'll need to provide your own extra ground wire to extend it. Personally I prefer to grab my power and ground both at the dashboard rather than grounding with a self-tapper somewhere at the back of the vehicle.

I installed this camera on my 2005 GMC Sierra 250HD. I connected it to a Jensen CAR813 head unit. This camera worked perfectly (tried 2 other brands and they were bad out of the box) This camera provides a very clear picture. Very good value for the money. I Highly recommend this camera

This is a review for the HD05 Camera (w/license plate bracket). I've not been paid nor incentivized to provide review. Rarely do I write reviews, but I feel this product (and Seller) deserve one. 5 star+I knew little to anything about aftermarket reverse cameras as I've had various fty. installed cameras (since 2006).In other words, I've never had to look for (nor hv. experience with quality of) an aftermarket camera.However, I do hv. a vehicle without any reverse camera, and when my HU (aka radio) needed replacement and the new HU had an option to add cameras I figured let me add a reverse camera.So I began researching the myriad options on Amazon. So many looked to have similar function/image quality (as well as similar issues like fogging or water damage after time). So how is one to choose?!Of course the experience with Seller (aka reviews) could be important (after all if such product fails down the road e.g. fog/water you need a good seller to back it). However, what immediately caught my attention here what that the Seller (or maker) claimed to have studied the many camera options & issues but more importantly found a way to distinguish their item from (most of) the rest. Whereas most if not all similar items on Amzn are plastic housing, theirs was METAL. The watertight seal (nano technology) also seemed to focus on the main quality/defect issues (fog/water damage over time). The claim (and sounds legitimate) is that plastic contracts/expands with weather over time compromising a camera's seal (whereas metal doesn't). That's prob. true (depends on metal type also) and only time will tell if this camera holds up (better) b/c I just installed it a few days ago.When I removed the product from box, I immediately noticed the quality feel and weight of the item (just as others). In fact, the weight makes it lightly that it's steel or similar (rather than aluminum), so if contracts or expands at all (over time) steel (I believe) will be less apt (if at all) to change (and certainly to warp).Too technical, sorry. Let's get to the point.Installation wasn't the easiest (at least for me) but the hardest (aka time consuming) part is really running the wiring from the HU to back. The 4 pin (red) connecter is great b/c it allows just a small(er) hole to be made near license plate. Make sure you connect the ground wire (see instructions) securely to a good bolt affixed to car. That will make the difference between a great picture and poor (or no) picture. Don't ask how I know :(In doing research about wiring cams, (especially in cars with Canbus), it's highly recommended to get power to camera using a stable constant 12V source (ex. cig lighter wire or tap a fuse, etc.), RATHER than powering it strictly from the reverse wire (near blub or elsewhere). You did this by way of a relay (search web). The reverse wire serves (only) as a trigger to close the relay so that the 12V stable power source from elsewhere (which is also connected to relay, then provides the screen its power (not the reverse wire....that's just the trigger). You will get best picture this way. This step may or may not be necessary on your car (some can get away with using the reverse wire directly for both power and trigger and without buying a spearate relay to wire up as described).I didn't finish wiring by relay b/c a little bit more time consuming and found that when I grounded well the reverse wire (alone) as power provided an acceptable picture for me.Picture is excellent on this camera. Plenty bright at night too (and I don't hv. LED reverse lights)!Seller is fantastic!!! Alice answers promptly always, great attitude and was able to help (even above the call of duty) when I was having an issue. They are there to back the product, no question!Great experience so far! Buy it; it's great and seller is great!

Bought this to replace the horrible eRapta camera. Installation is pretty simple, no different from any backup camera. Good on them for providing a ground connector, taking one more step and providing a split for the power would have made it even easier. In my case the only way install the camera was using the provided frame which made a bit to visible, but it is what it is.I am reasonably happy with the image quality. It may not be on par with what modern OEM gives, but you can see everything you need to see day or night.

Been over 6 months so far. A very good quality cam for the price and easy to install if your somewhat ok at wiring.

Installation was not terribly difficult, in line with another one I did.Very clear picture quality and I like how the camera brackets are hidden making it a much cleaner final result above the license plate.

Video Quality:I installed the Pixelman backup camera, and the video clarity is very good. Color is ok, and I’m fortunate I can increase the color setting on my head unit. Dynamic range is decent and does not blow out from what I’ve seen so far. Night time video is ok, but much better than the Autovox CMD24 camera which was useable, but very grainy/noisy. Frame rate is smooth.Reliability:I have this installed with constant 12v power when the car is on, and this has not given me any issues for the past two weeks of driving.Form Factor:The camera is small, but not as small as the Autovox CMD24. I believe it still achieves the discreet appearance I was looking for.Installation:Installation is straightforward, and one of my reasons to purchase this specific camera is the slim 4-pin connections to minimize the cut into my grommet. I purchased a 4-pin extension cable to route the supplied power converter near the fuse box and replaced the supplied video rca with a smaller cable since the fuse box is in close proximity to the head unit. Please note it seems not many backup cameras’ power converter includes a female rca connection, as the rca cable is usually hardwired with a very long cable.Value:This camera seems like a very good value for the price ($30 around the time of this review)Customer Service:Very responsive when I requested the free offer of a video monitor to test, since I was not able to install the camera immediately after purchase.Additional Details for Reference:Some details to help understand my review perspective:- installed on Porsche 911 997.1- using Alpine ilx-w650 to view backup camera (480p screen)-have used on sunny days, nighttime, and inclement weather (rainy)