FIRSTINFO A18569US Windstorm 2X High Flow Two-Way Taiwan Air Blow Gun – Adjustable Flow, TPR Anti-Slip Handle

Product does what it says. You better have a good compressor b/c it pushes so compressed air it can drain your tank fast. Build and finish of product point to quality. Awesome tool.

I’m impressed with the increased air pressure it provides. Adjustable to fit your needs. Recommended.

This is an awesome set, it includes almost every attachment for an air blow gun one could think of, the venturi nozzle is very impressive for the sheer amount of air it moves, but it is very loud to the point that hearing protection is needed, the build quality seems to be very good, well worth the $60 I paid for it

I was in the market for a hi-volume blow gun, so naturally I jumped on Amazon and started looking around. There are a handful of different types of hi-flow blow guns out there that had pretty much the same CFM specs and price. The only major differences between them were they way they looked...and I'll admit, I purchased this one just because it looked cooler than the others. You never see it in the movies, but underneath all that hair, Chewbacca has a pistol that looks just like this as back up to his laser-crossbow-rifle. I don't have other hi-flow blow guns to compare this one to, but it really moves a lot of air. It operates just like all the others do, it draws in air thru holes in the nozzle to generate more volume. That volume also comes with more sound, too. It's pretty loud. The specs say it's 100dB. Huh? I said it's loud! What? I SAID IT'S LOUD!! I CAN'T HEAR YOU!! Never mind... The specs also say that air inlet on it is 1/4" PT which I assumed to mean "pipe thread", but they are not your typical pipe threads (they're certainly not NPT). This was a little disappointing because I was going to put a high-flow air plug on it and wasn't able to. I deducted 1 star because of this. It appears to be normal threads and the air plug has an O-ring to seal it. You can fit the air plug to the top of the gun if you're using this in an environment where you may have the gun hanging from the ceiling which is a nice feature. It does have an adjuster to control the amount of air this thing releases, but it's kind of fidgety. It does work, but small adjustments turn into large changes in air volume. Also, it doesn't go from 0 to 10 (like a volume dial) with stops at both ends. The dial will spin and spin and the air volume changes from low to high to low to high to low to high to low to high.....you get the picture. When the tool arrived, the manufacturer had included some ads for other tools they offer, and they offer this tool with different attachments. The blue nozzle on the end screws off and you can attach other things to it (like long blow nozzles, short nozzles, etc.). It's cool to see that this tool can be a "regular" blow gun and a hi-flow gun, but was a little disappointing their listing on Amazon makes no reference to this feature. I'm not deducting a star for that--I'm more upset at myself than anything because normally my Amazon-shopping-ninja skills would have found that out before I purchased it. Overall, I'm very happy with this purchase.

Amazing little piece of simple tech that works great! The Venturi effect is painfully loud but it sure puts out some air. The little adjuster does a great job and is located so you can operate it while adjusting with one hand. Hopefully this one will last for years but if it doesn’t I will replace it with one just like it.

Everyone needs a blow gun. They're great. I use mine for everything from dusting my computer, to drying crevices on my vehicles, to cleaning out my my garage. This one is exceptional and I highly recommend it. The design (pulling air in from behind the nozzle) works incredibly well. It really does amplify its blowing ability. This blowgun, purely due to the CFM it can expel, is air hungry. I get less than 10 seconds of intermittent blowing at 150 psi using a 6 gallon 5 CFM compressor. This is to be expected, you can't beat physics. I've had it on my 80 gallon 70~ CFM shop compressor, it's a much better fit on that unit. Regardless of your compressor capacity, I highly recommend this blowgun. It's *almost* magically good.

Moves a lot of air but wear hearing protection, very very noisy, like 130dB. I used the first time without my hearing protection and was astonished by how loud it was. Adjustable air flow knob is useful. Good build and material quantity

The one i received was probably bad. It worked really well on low abs very good at high. There was no in between with the adjustability. Regardless of the position, it was either low speed or full blast. It’s very loud, but i don’t have anything else to compare it to. The body n nozzle are very well made but the trigger handle was extremely thin and i think very flimsy. I was afraid to drop it Because it looks like it will break easily. Not bad for 17 bucks but like the saying goes, you get what you paid for.

Great gun for blowing out the filter in my ash Vax and the household hoovering.It arrived only this morning and might i say it was before the expected time so I've had little time using it but so far it's very good noise factor not as bad as I was expecting from comments i read before buying overall very pleased

Hace mucho ruido y se termina el aire de mi compresor demasiado rápido

This is a very comfortable and easy to control blow gun. It is extremely flow rate even without the nozzle (make sure you have a large enough compressor), and the extra air from the nozzle was fantastic. I joked that I could probably use this to clear snow in the winter, but I can't test this for another few months. The adjustment knob was something I had to get used to. It only adjusts a little bit and then if you turn more it goes back to full power. But it felt sturdy, and maybe if I had tested at a higher PSI it would have been more helpful (I only tested at a little over 100PSI which is basically the minimum to notice much of an increase in air flow). For me, I generally like to keep the pressure a little lower, but I could see some shops wanting higher pressure in their lines. I think what really interested me was the accessories that were compatible with this unit, and the general comfort and sturdiness of it. I'm used to the typical blow gun attachment that every shop has, and this is definitely a big step up. The nozzle is just a beautiful piece, as it is pretty much a solid piece of what I assume is anodized aluminum. Not that I judge this by looks, but it does look really cool.

todo bien

Nice air gun, it’s well made with good materials and works really well. The air flow adjuster is smooth and easy to use, the air induction tip really increases airflow volume, and the trigger is robust and ergonomic. I like this product, I use it to air dry aluminum cnc parts, but will get more for each mill to clear chips and coolant.