Magicfly Bathtub Repair Kit White, Fiberglass Tub Repair Kit with Wet Sandpapers for Cracks and Holes Repair on Acrylic and Porcelain Surface, Shower Repair Kit for Tile, Sink Repair

I wanted to repair a dozen small chips in a porcelain cast iron sink. I cut the blue tape into small squares and used a hole punch to put an eighth inch hole in each. I then masked off each chip. The two-part epoxy was easy to mix together (of course I mixed way more than was needed) and then I dabbed each dot with the epoxy and smoothed it out with the spatula. I removed the tape immediately afterwards before the epoxy started to harden. It's a slow setting epoxy so you have plenty of time. It was hard in about 12 hours but I let it go overnight. The next morning I wet sanded the dots using the two grits of sandpaper supplied so that the only epoxy remaining was that inside the chips. The sink looks brand new!

The costing was easy to prepare and to apply. The one thing I was not happy with is that some water was left in the tube and afterwards the coating discolored. I have used various items to remove and even sanded but does not remove. I am currently looking for a replacement product to over coat the area. Not fully recommended as a total recommended solution.

I was skeptical about this working on our white fiberglass tub/shower, had about a 5” vertical crack on an inner cove area from delivery issue. Followed instructions and after taping it off, application and sanding it’s as good as new. I put it on quite thick and it took a bit longer to sand it down flat, but I didn’t want any voids or open edges. Have enough for a 2nd repair left over. If more wet sandpaper is needed, can get at Home Depot or Lowe’s. Repair is not noticeable at all, would highly recommend!

Hard to spread. When dry it took forever to file down and still didn’t get files down so it looked decent. Not impressed.

This is a TERRIBLE product! Not the color as indicated and RUINED my bathtub! Had a couple of chipped spots and even meticulously following instructions led to an almost yellow outcome. Now my tub looks like an acne-laden teen and my house goes up for sale tomorrow. The pros were scheduled out 3 months, so I made the mistake of thinking this would be a good alternative. This was a huge mistake. Thanks be used similar products in the past with no issues, but this one was a joke. Run away as fast as you can!

The product was easy to mix and apply. When dried, the color matched almost perfectly, where you couldn't see it unless you really looked closely. I'm not sure of the durability as I applied right before putting my house on the market, but if it lasts, this product is a perfect 10!

A little messy but did a great job .

It is useless item. Low quality and no quantity. Hard to use and spread and no adhesion. Worst merchandise of any kind in my life.

Worked well to cover chip. Make sure to to apply thin layer or you end up sanding a lot

Had a chip on the tub so thought I would give this a try. It fills in the gap but does not mold perfectly

It filled some pretty sizable cracks in my acrylic tub. Time will tell how it holds up.

Should have known better that to buy the bargain brand. The tools that it comes with are useless. The instructions it comes with are useless. And what little product I manages to get to work, has yellowed over the course of a month or so. This is one of those ‘you get what you pay for’ type things.

Fit for purpose