Hibbent 10 Pieces Toilet Seat Bumpers, Universal Buffer Toilet Lid Rubber Bumpers Each One with 2 Thickness TPE Pads(2 Heights) Strong Adhesive Bidet Bumpers Used for Home, Hotel, Hospital

I recently put a bidet seat on and it was then too high off the toilet. I ordered this product and couldn't be happier. They provide a wipe to make sure the product sticks, instructions, several sizes and great adhesive. It worked like a charm. I would definitely recommend this product.

So far, so good. Read that these don't adhere well over time, but I will regret if I have to. They worked very well in offsetting my bidet, now the toilet seat fits very well. The two different thicknesses really worked well.

These are a heavy-duty answer to replacing the chusion pads that support a toilet seat. But the instructions leave a lot to be desired. First, they are typical instructions written by someone with little command of the English language. I've seen worse, but despite the good photos in the instructions, that did bother me. Second are the Primer "wipes" that are suppose to insure good adhesion. The envelope calls them "Primer: Adhesion promoter" There is a droplet graphic in the corner of the packet, with the note of "2.0ml" that suggests there is a damp towel inside. I opened two of them and there was no moisture whatsoever inside. I dutifully rubbed them on so I could say I tried. The kit comes with a few options to allow for different needed heights, and extra sticky tapes. The adhesive is very strong. Overall the kit is very good, except for the worthless Primer, and the poor instructions.

I thought I had already reviewed this but seems not! Well, I'm very happy with this product. I have a wooden toilet seat, no paint, just dark wood. But the bumpers broke within a few months of use. So I replaced them with ones made for wooden seats, and again, within 2 months they were cracking and not doing the job. I was hesitant to try these, I didn't think they would stick to my wooden seat. But I was wrong! I used two per side, rather than the one that is suppose to be used, and positioned them a little behind and a little in front of the existing, broken bumpers. And they do sit a bit higher than the old ones did. But you don't notice it when you sit on the seat, and they WORK PERFECTLY! I was surprised with the pre-wipe the supply, as it was dry... I actually opened a second pack, thinking the first one was dried out. When I realized both were dry, I simply used it to wipe the pre-cleaned seat area where I intended to place the bumpers, and then placed them, closed the seat and at on it to set the bumpers. And they stuck perfectly! This was about a month ago, and absolutely NO sign of slipping or cracking! VERY happy with these bumpers, they truly are universal as they even work on wooden seats! Two thumbs up from me!

They do the job, they lift the toilet seat up so the bidet doesn’t get stuck. Easy to install. The wipes that come in the package to promote adhesion are some kind of very powerful smelling chemical. I had to turn the fan on in the bathroom and vent the room after using them. Definitely make sure the room is well ventilated. I also washed the stuff off my fingers right after using the wipe and had to dry my hands on my shirt, which left bleached stains on my shirt. My fault, I know, but I would have liked some kind of warning on what the wipes were and to keep them away from clothing.

Works perfectly for my bidet install. Keeps the seat level and adds needed support .

I have a bidet so I needed these. Would not stick to the toilet seat. Whole purpose of product. Pieces fell into toilet. Durability was nonexistent. Bumpers would not stay in place, toilet seat collapsed and bumpers fell into toilet. Returned for refund. Don't waste time or money.

These are solid, and the adhesion is great if you put them on a clean surface. I cleaned with isopropyl before installing and you would need a pry bar to remove. They are pretty thick though. I wish they were thinner but if you look at the details (and the questions, someone was nice enough to do a print) you will see that you pretty much get a 1/2 inch lift which is a lot. I was thinking about whether I could cut them down, but I actually am going to lift the mounting of the toilet set so I can keep these bumpers as it is easier to put a spacer under the seat than any other option since I can't get the original bumpers. They are very nice, just thick.

good, but didn't fit

Put these on 18 months ago (following the directions) and everything is in place still and the toilet seat remains stable. Used the thickest pads for a seat with a bidet attachment, but now putting the thinner pads under the other toilet seat for more stability.

Easy to install. So far so good. I bought 2,installed one and worked fine. Installed the second one and first try it leaked so I reinstalled it and it was fine. If it does leak it’s usually because the of the gears. make sure to use the plumber’s tape there is enough included in the box. Also the gap that it adds is not that bad. If you really want to balance it make sure to buy the spacers.

the adhesive system is really good. I think you could use it to hold a locomotive in place. the high friction rubber pads are excellent and truly stop any sliding. One downside. The nubs are quite high (even on the thinnest one offered), this will cause the entire seat to stand up about 5+ mm higher. But remember you have to still screw the seat to the toilet and that's now 5+ mm higher. You'll have to make an adapter for the toliet nuts to tighten down on (not supplied). i have a 3D printer so that's a 20minute job for me, maybe garden hose washers would suffice?

They are not rubber but thin plastic equivalent. Pin didn’t fit the grooves. I had specified I had American Standard seat and they referred me this product. I returned it the same day and got a refund.