Ekopel Bathtub Refinishing Kit - Made in The USA - Odorless Tub and Tile Reglazing - Most Durable Never Peel Tub Paint Coating - Pour On Touch Up Size

Great product, no Odie Yeah! This size is adequate enough to cover the complete bottom of a standard sized tub, this is where there was significant wear after 28 years of use. Very happy with this product This size is a repair kit, small size and does not come with the tools that come with the larger size. I used credit card sized stuff cardboard to distribute evenly, also used a fine 3" paintbrush fir the finishing detail. Be careful though, the brush shed one bristle/hair, it was a nightmare to remove. If you use a brush I recommend you have a pair of tweezers close by.

I am SO impressed with this product! I had a hideous gold fiberglass tub and surround that wasn’t in the budget to replace. The roll on product was very easy to use and gives an incredible result, but I will give you a few tips: 1. Prep is everything! Fortunately we were completely redoing this bathroom so I didn’t have to worry about the product getting on the floor, but you’re going to want to make sure to cover the entire floor and anything close to the tub (sink, toilet). And scrub/sand better than you’ve ever done in your life! 2. THIN COATS! Roll this stuff as thin as you possibly can to avoid runs and make sure you have enough product to cover the entire area. 3. High-quality foam rollers are essential. I did the first coat with some crappy rollers that ended up getting bits of foam in the finish. I was kind of freaking out, but that leads me to my next tip: 2. This product is surprisingly forgiving! thought I had gotten every trace of silicone off, but after the first coat I noticed there were some areas where it wasn’t taking, in addition to the bits of foam. Don’t fear! You can gently sand between coats on any rough spots, and the second coat will cover beautifully. During the rest of the bathroom reno we ended up accidentally dropping things (screwdrivers, levels) on the tub, and not a scratch in sight! I seriously can’t believe how well this stuff works.

So when applying make sure to remove any tape you have along any edges. I let mine dry and it chipped away at the edges when getting tape off because the stuff adhered to the tape but the tape didnt adhere to the sides of the tile so it chipped. But if you sand the stuff down to make smooth then repour this kit it is exact same stuff as in any other big kit. You get a can of the stuff with activator. Just make sure also not to mess with it around 5 mins after you pour it or it wont flow out and self level.. but is a great coating, thick shell and will last a while if you dont make it too thin..

The finished product looked like crap. My husband is jack of all trades and a master electrician. He has built homes from the grou.d up. Funny, not so much that this product worked out horribly. There is all drip marks and dimpling, the coverage is poor. I wash my hair with blue shampoo and the stains won't come out. Thus product shouldn't even be sold. There is nothing about it that is good or durable. I put a bath mat in 4 days later and now there is all raised circles at the bottom of the tub. Product is horrible. Please leave this to a professional, not this outright crap! Don't make the same mistake we did. Weeks later the paint scratched through like nail polish does. Don't do it!!!

Works great, good for fixing a peeling area from a prior coating. I sanded with 80 grit first, better adhesion to a slightly rough surface. I used 3 coats. A trick to get multiple coats out of 1 batch (not official or planned, but it worked): freeze it after mixing, then thaw and little and refreeze. This slows the epoxy reaction so it can be used for later coats. Ideally you only mix what you need, but freezing is a backup plan.

wish they made a smaller size so people can use to do refinish on small area as you have to mix the entire proportion to get it to work but what is wanted is half of the bottle as it was used to retouch a area of tub that the paint was flaking off. But is easy to used just remeber for touchup there should be a option to get smaller size bottle

Recommend a high quality foam or bristle brush. We found it difficult to avoid tiny bubbles, even using a high density foam 2-inch roller. Had to sand down a bit to minimize the uneven appearance caused by the bubbles. Ultimately, very pleased with final sppearance of the repair. If you only have a small area to to work on, this is the same as the larger size pour-on of this product. Definitely the way to go since you cannot save unused mixture for later use. The company rep on the phone was extremely helpful! She assured us that, although this is a pour-on product, it can be painted on for a tub repair. Thanks!

I saved a bundle using this product as part of a several part DIY process that included using expansion foam, bondo putty, sanding and taping and ultimately coating with Ekopel. This was to repair a busted plastic shower pan in a rental. How well it holds up remains to be seen but it performed the way I'd hoped upon application and really looks great. Because the product is basically a liquid plastic, I recommend it only for re-coating these types of surfaces and would not necessarily use it on porcelain tubs or sinks. I do not think a plastic coating on porcelain will yield the correct results.