BAOSHISHAN 4 Ton Bottle Jack 10-5/8" to 24" Lifting Range High Lift Double Ram Bottle Jack Hydraulic Welded Jack Truck Jack

I tested out lifting the Tesla Cybertruck, which required 18" clearance to remove the tire. Lifting was easy-peasy and only required two metal pump extensions, even though the jack came with three. The jack arrived brand new and appears to be of very good quality. It just takes a little force to lower the jack to its base setting. It's well worth the price compared to lower-cost 4-ton jacks, which typically can only raise up to 16 inches. I couldn't be happier with the purchase and highly recommend it for high-clearance vehicles if you don't need a 12-ton bottle jack, which will be much heavier.

This works great for our 2020 Lincoln Aviator. The OEM jack actually BROKE when using it! Luckily no damage to the vehicle. This has a wider base and the 24" lift is enough to get the wheels off the ground without needing additional blocks under it. We are just keeping it in the back with the spare tire. One nit-picky thing, though, is that it doesn't fully retract on its own when lowering. So you have to kind of yank it out from under the car and then manually push down on it to get it collapse all the way. But that's common among these hydraulic jacks.

12/14/2024 UPDATE: Used jack one time, lightly. Walked into my garage the other day and the jack was sitting in a POOL OF OIL! Took a while to figure out where the leak is coming from, but can see that oil is leaking from the threaded portion of where the actuating cylinder (i.e., the part you cycle to extend the jack) is threaded into the jack body. It is about a 1/2" pipe thread near the base of the jack. I am hoping the manuafacturer will see this review and contact me to make it right. Not happy about this and I also have purchased a 5-ton model in the meantime. Original: The versatility of this jack is fantastic! Seems to operate smoothly and be a quality item. "Double Ram" is not really accurate, but that's the world we live in. It is actually a "2-Stage Ram" since one ram is encased inside another. No big deal.... semantics. In operation the larger ram extends first due to laws of physics. This means that until the larger ram is fully extended each pump of the handle results in less lift than when the smaller diameter ram starts lifting. ALL brands of this design operate identically. Alas, this fact also means that once the smaller diameter ram starts lifting it also requires more force per stroke but greater lift per stroke. Get it? Common sense. For me, I have learned to purchase a jack with at least twice (i.e., > double) the capacity than what I actually plan on using it for. Takes more strokes and time, but less force required per stroke. Tradeoffs. Would have rated 5 stars if the price were <$100.

Arrived wrapped in bubble wrap. Handle is 3 pieces. One piece deformed and wouldn’t seat into other piece. Since I needed it, I used bench vise to reshape and get it into its mate. Of course it’s not coming back out. So far seems the jack itself seems to work properly. Just updated rating to 4 stars based on seller's prompt and satisfactory response to my issue. Also, the jack has been holding my boat up for a week now with no slippage.

Muy buen producto. Excelente altura y robustez.

I chose this jack because of the max lift height and capacity. My truck's axles are about 22" above the the ground, so I need a tall jack unless I want to use excessive amounts of blocks (which isn't safe). Truck weight is around 12k pounds empty, 16.5k loaded. So a 12t jack gives a 100% safety margin empty and 50% loaded. This is the tallest 12t+ jack I was able to find. The jack arrived in good condition. Its big and beefy and looks well made. I did a "test lift" of my truck (empty) and it worked just fine. It lifts slowly, but that's to be expected given the high weight capacity. BTW, I used a Safe Jack axle cradle to safely lift the truck. Using a bottle jack with a small round screw pad on top directly on an axle is not a good idea. The Safe Jack 20t "universal lift pad" fits this jack. I still need to get a bigger and thicker base plate to place under the jack for stability and to prevent sinking in soft dirt, and to get a little more lift.

We purchased this jack for our 2006 T1N Sprinter van, which didn't have a jack when we purchased it; it's difficult to find a jack with enough capacity *and* enough lift to handle a Sprinter, but this one is a good match (and, as we discovered, fits in the factory jack holder under the floor!) Unfortunately, the jack we received wouldn't retract; the seller was responsive to email and quickly shipped a new one that works. Given the somewhat premium price (relative to other Chinese-made bottle jacks) I expected a bit better QC from the factory. It was supplied with a set of o-rings and a cup seal for the pump, but not for the rams. The surface finish on the rams is not great -- not what you'd want on a hydraulic cylinder in continuous use, but adequate for the jack's intermittent use. The finish is very thin spray paint, just adequate. Note that this jack does not have the "cup" present on the Mercedes OEM jack; the much smaller head means you must be *very* careful when lifting a vehicle, or purchase or fabricate a more supportive head.

Would not recommend based on first trial. I tried several bleed procedures without luck and reached out for replacement. Will report back if they send a second unit. Update 2 weeks later: another unit was shipped and received. This unit works without even attempting the bleeding procedure. This is the second size jack I purchased from this company and the have many models to meet what I needed.

Heavy duty excellent qualty.