ALEKO Awning Wind-Sun Sensor for Retractable Patio Awning | 110V AC | AWSS

You will see good and bad reviews for this item. It is not a bad product, just misunderstood. The instructions included could be a lot better, and the sensor does NOT come with a cord. Mine had a 230v sticker on it as well, which led to more confusion, and i ordered a 110 to 220 converter as well (it was not needed).I attched a cord as seen in the pics. When you plug it into the wall, the led blinks 2 times and does not stay lit (its not supposed to stay lit). The absolute simplest way to program the sensor to the motor for me was as follows.1. Have your remote for the motor handy, take off back cover.2. Extend the awning a bit or all the way with the remote, it dose not matter how far.3. Unplug awning for at least 10 seconds.4. Plug in motor and sensor into 110 connection, you will hear a beep from the motor and sensor led will blink twice.5. Within 6 seconds of the beep click program button on the remote two times. You will hear a beep confirmation.6. Click the program button on the sensor, you will hear a beep. Its done.7. To confirm the programing, click up button on sensor and awning will roll back.You should program the sensor to the motor first and then mount it.Thank you Aleko for the quick shipping and quickly answering my questions.

I am rating 4 stars because setting up the sensor is finicky and I had to call for help and download better directions. However, Customer service and tech support were very responsive and effective. My system is all set up and I love my awning. It is just beautiful and nicely made.

Excellent product! We ordered the retractable (motorized) awning from Aleko. Then decided we wanted to order the Wind-Sun Sensor which will close the Awning if winds are too high and open to provide shade from the sun. The shipping time was quicker through Amazon but, priced the same. The Aleko products are priced very well. The quality of their items are excellent. The directions assumes that the installer is mechanically inclined based on some reviews I have read related to lack of directions for installation. However, we found that it was not a complex install for the awning and/or Wind-Sun Sensor.

It is working! The installation of the AWSS is an ease but the programming instruction is not so clear, It is just a fade printed illustration instruction.The AWSS came bare with no cord, so you will need a 2 wires cord to plug in the 110V. power.I am able to programmed the AWSS to works together with the handheld remote.•program your remote that came with the motorized awning first.• open the back of your remote, plug in your AWSS. Open your awning with your remote , once the awning starting to open, press programming button on your remote two times, the awning with pause•immediately press the program button on AWSS,•then press programming button on your remote two times, the motor will beep a few times, if you didn’t here a few beeps, then press the programming button once more on the AWSS then two times on the remote. Once you hear a few beeps, You are done. You may have to kept doing this a few times, I have to alternately press the programming button couple of times.To test the AWSS, press the upward button once and the awning should close.Now both your handheld remote and AWSS are working together. Adjust the wind and light grade per your preference.

We installed an Advaning Classic motorized awning in 2018. I have spent years looking for a wind sensor to close my awning should the wind pickup. No luck until now,,, The Aleko pairs easily with my existing remote.

I bought this product with the full owing that it controls for over $1100, and it was so difficult to install that I had to hire three people to do it. It broke within a week, and the quality is terrible. It's like a child's toy. Too weak. Don't waste your money. You'll thank me later.

Wind sensor came without Installation instructions.Unable to install .Have to contact Manufacture.

Another purchaser listed good instructions but they are missing one crucial step! When clicking the program button twice on the remote, you must click once, wait until the awning motor "jogs" and issues a beep, then click again, wait for the motor job, then click the P2 button on the sensor. I was clicking the program button too fast with no pause so the remote failed to pair with the awning. Here are my updated instructions:1. Have your remote for the motor handy, take off back cover.2. Plug in motor and sensor into 110 volt connection, the motor will "jog", you will hear a beep from the motor and sensor LED will blink twice.3. Within 6 seconds of the jog/beep, click program button on the remote. The awning motor will jog and you will hear a beep confirmation.4. Click program button on the remote again. The awning motor will jog again and you will hear a beep confirmation.5. Click the program button on the sensor, you will hear a beep. Its done.6. To confirm the programing, click up button on sensor and awning will roll back.