Musiclily 1650x7x1.5mm Plastic Binding Purfling Strip for Acoustic Classical Guitar, Ivory

I am very satisfied with this product. The dimensions were accurate, within my ability to measure them. The 1.5 mm was just right, but the 7 mm was too much for my project. I taped it is place temporarily, and used a utility knife blade to scrape it to the approximate height I needed, then finished the process with the utility knife blade and sandpaper after gluing. The Shellac top coat I used adhered well. I was restoring an A style mandolin. Everywhere except the sharpest curve where the binding meets the neck, painters tape was all I needed for clamping. I use 4 inch strips about every inch. At the neck, I actually had to hold it in place with with a flat blade screwdriver blade until it set. The Bind-All glue I used set quickly, and I only had to hold each side for about 10 minutes. The final result is great.

I believe that the product description should make it clear that there is only enough binding for either the top or bottom binding on the average size guitar; not both. I wanted to install bindings on a baritone ukulele, but only had enough to complete the bottom binding. I then had to reorder another package to complete the job. Very inconvenient!I also found that the thickness was not the specified 1.5 mm, but instead measured 1.42- 1.43 mm. (Verified by 2 digital micrometers.)

Looks great, used acetone to attach to body worked great!

The binding works well, if you are careful. No tight bends, without care. Can be prone to breakage. But, overall, does the job..

Good stuff, perfect, as ordered and they threw in a couple guitar picks! Thanks :)

Molto buono ,peccato che ho dovuto attendere 5 settimane x averloDa rinunciare

Qualita e delivery ottima.