🌊 Dive into Reliability with HiLetgo!
The HiLetgo 2pcs Water Pump is a high-performance, ultra-quiet micro brushless pump designed for various applications, including pools and aquariums. With a flow rate of 240 liters per hour and a maximum lifting height of 3 meters, this pump is powered by a 12V DC source and boasts an impressive lifespan of over 30,000 hours. Its IP68 waterproof rating ensures it can be submerged without issues, making it a perfect choice for aquatic environments.
| Material Type | Ceramic, Acrylonitrile Butadiene Styrene |
| Style Name | Submersible |
| Color | Black |
| Item Weight | 1.06 Grams |
| Item Dimensions L x W x H | 2.17"L x 1.77"W x 1.38"H |
| Maximum Lifting Height | 3 Meters |
| Voltage | 12 Volts (DC) |
| Flow Rate | 240 Liters Per Hour |
| Power Source | Battery Powered |
S**M
Good value
Very good functionality, pumps and flows well, durible, easy install. Use a filter to keep debris out of impeller.
C**J
Work Well
Cool little pumps and very quiet
D**R
These are ok for light use
I’ve purchased many of these small fountain pumps. I use them water potted plants with a timer, battery, solar panel setup. But they don’t last long. Maybe 2 to 3 years outside.
P**.
Sturdy, versatile and serviceable.
I ran mineral spirits through this pump into a clogged A/C condenser. Powered the pump via a bench power supply. I ran the pump for about 10 hours stopping every couple hours to blow the condenser out with compressed scuba air. Even back blew through the pump several times.After about 10 hours of use it quit pumping. Removal of the 4 screws on the pump face revealed biological material in the impeller which was easily removed and pump easily reassembled.Pump functions as new after removing debris from impeller.
L**N
Sending back
These are super tiny and they have no way to plug them in without splicing something
B**R
Good value for money
You get what you pay for, theae are cheap in cost and ability. But if you treat them correctly they will workBut don't let any debris get in, the pump will seize up and you need to remove the tiny 4 screws and remove the debris.However, because of the design, clogging the pump and causing it to seize will not hurt the pump.The pump.needs to in the chamber to work. One little air bubble and the impeller will spin ans not pump liquid.
A**R
Works great.
Work great at a great price.
C**E
Good value. Flow > Pressure. Simple. Quiet. Efficient.
These are great for the price point.When they are working they move the expected amount of water. Pressure is proportionally weak, but that is a side effect of spending the available energy budget on flow/volume/mass. You would need to move less volume to get a higher pressure for the same watts, that's just physics. With a hose the same ID as the barb, I get about 2-4 feet of lift before back pressure causes it to stall, which is damn good for the flow rate and the sub 20 Watts honestly.The biggest con is they are bad about cavitation and priming. You have to be very particular about keeping the input loaded with only water. Even as small as a few CC's of air will cause stall/cavitation. The problem can be worked around easily if you have a level head on your shoulders.Basically, these are ideal for relatively high flow and reasonably closed loop applications. Liquid cooling PC's, fish/fountain pumps, etc. Not as great for situations where the input is getting exposed to air, or expected to start from an air locked state. Definitely not good for anything that relies on pressure to get the job done, e.g moving fluid against gravity, spray washing systems, etc.Haven't used them for anything other than fresh water, so I don't know what other liquids they could handle.
Trustpilot
4 days ago
2 weeks ago
