EZ Grip Friction Drops©, Aircraft Grade, 3 fl. oz. EZ59183

This is exactly what I've used for 35 years of helicopter maintenance. Ideal for those stubborn panel screws. Dip the screwdriver straight into the bottle. Works like a champ. The Army buys this same brand and issues it from the POL shed whenever you need it. Excellent product!

I was dubious about whether the EZ Grip Friction Drops would be worth buying because of the cost, and because the claims seemed too good to be true. I used it to help get a purchase on some stripped screw head drives so that the very stubborn shower drain screws could be removed with the help of a manual impact extractor. The drops worked very well and saved me from the trouble of drilling the screw heads and using a screw extractor. The drops were definitely worth the cost.

To those who have read bad reviews of this type of product, or have written them - this product increases the FRICTION between the driver and screw. It isn't a super glue or magic wand, and it cannot replace the screw indentation that you clumsily destroyed.There must still be a screw slot or cross for the driver to engage!If there is, this product will mostly stop the driver from camming out. It's a very good product.

This stuff is amazing! Just a little drop on your screwdriver or apex tip and worn out screws come right out. Saves a lot of drilling off heads.

My robotic lawnmower uses a type of spinning razor blade to mow with. I made the mistake of screwing them on with my drill. The next time I went to change the blades, one of the screws was stuck. First I tried WD40, then Liquid Wrench, both are excellent products but the screw was stuck , not rusted. I couldn’t get enough torc before the screwdriver slipped. After some research, I learned about EZ Grip. There were several other similar, cheaper products, but the reviews led me to choose the more expensive EZ Grip because I didn’t want to pay for a product that might not work and then still need to get this one. At first I tried the Phillips head screwdriver. No luck. This screw head also had a slot so I tried a flat blade screwdriver and it worked on the first attempt. I’m still so shocked that it worked, saving me the hassle of taking it to a repair shop. Good luck with your own stuck screws. I will have EZ Grip in my own toolbox from now on.

This product is great to have in those cases where stubborn screws just won't budge.

If you work on aircraft, you might already know, but this stuff is a necessity.

I really didn't expect this product to work, but for the tiny, recessed hex screw under the handle of my sink faucet, I thought it was worth a gamble. I just put a tiny drop at the end of my hex key and - voila - it worked immediately! The hex key easily unsrewed the tiny screw with no slippage at all. This allowed me to finally fix my dripping bathroom faucet. I have added this to my toolbox and I am sure it will come in handy in the future - amazing product!