ECOTRIC Rear Trunk Lid Wing Spoiler Compatible with 2005-2013 Chevy Chevrolet Corvette C6 ZR1 Carbon Fiber Painted

Looks factory installed.

Absolutely Perfect fit and great quality product.

Fast delivery! Easy install, looks great!!

Rear center brake light. Comes with instructions. You can choose to have the brake light flicker repeatedly before a steady light when braking, or it can work like a normal brake light. Installation relatively easy. Just have to remove the center tail lights to access the center brake light. You will also need to remove the old light from the bracket/ mini spoiler and replace with the new light. Would rate a 7-8 out of 10 for ease to install. The picture shows the brake light but installed a rear spoiler that is covering the mini spoiler.

It doesn't screw on. This comes with double sided tape which is questionable. It might come off at >100mph, so I only used some long the edges to keep debris out, and to keep it in place while my real adhesive dried.The best adhesive for something like this would be automotive or marine type "Goop" which is easy to find at Walmart and or parts stores. I run slicks right now, so I'll loose traction around 90mph or so depending on throttle and road quality. That is, until I installed this and now it's easy to notice a big difference. Be sure you line it up by angling the item to the rear 45 degrees holding it to straddle the center reflector perfectly. From there, slide you hands apart to carefully fold it down forward so the tape wont need to be ripped off (if you can even do that, it's strong) If you screw it up, you might try dental floss or fishing line to saw the tape off but follow my method and you'll get it right the first time like I did. The center bottom of this spoiler has some play, so it wont good to put tape where you can't press it hard down I figure. That's why it's ideal to use 2 rows of tape front, one back, and go with 4 big dobs of Goop in the middle on each side after you clean the surface well with rubbing alcohol or denatured alcohol from the paint store if you're really picky.

It is really nice spoiler the carbon fiber looks real it's very light so it ain't going to pull off once you taped it on I did get 3M tape because everybody said the other stuff is junk one thing I seen people saying that it wears off if you drive a lot with it I clear coat it mine with Auto body clear coat two coat to two coats of that I don't so I don't see the problem with anything coming apart I mean I mean wearing off it's very nice I like it it's better than the $400 ones just as good I have a 2008 4lt Corvette

I bought this purely for a quick fix because former spoiler deformed in the sun after years of sunlight. Price was fair for what it is and overall it it fits ok. It came with some scratches in the hydro dip but will be painting in the future. I had to trim the bumper cover to fit the the 3rd brakelight pigtail to fit. There is still a gap under it even after shimming the light mount. Drivers side fits great but is about 1/8 inch gap on the right. had to double up the tape on that side to make contact. Looks ok but you get what you pay for.

This one piece 'no drill' rear deck spoiler fits the curves above the 3rd brake light perfectly with no gaps. This piece is well made, firm, and has a reliable attachment with the provided adhesive tape. The carbon fiber pattern is uniform & looks good upon close inspection. The pictures don't show the details to make a confident decision for purchase but I can confirm it will fit a 2007 corvette C6 convertible base model right out of the box with no modifications required.