Safety-Walk Slip Resistant Tape, 4 in x 15 ft, Anti Slip Tape, Adhere Without Wrinkling, Curling, Tearing, Shrinking or Lifting, Self-Adhesive Backing For Quick & Easy Application (610B-R4X180)

These treads are very easy to install (except for the paper backing--a little challenging to get off if you don't have fingernails). They grip well and provide a good, non-slip surface. I installed on deck stairs that were a little wet at the time but they adhered well and are still securely in place. The strips are especially easy since they are pre-cut. Would recommend.

Great stuff. Super adhesive. Installed on basement stairs. Just what was needed.

Like the item put them on my SUV right away before snow hit works really well I’d get more

Must have for anyone with outdoor steps. Last summer I built a set of steps to connect my 2nd floor deck to my yard. This does a great job of providing grip in the rain and snow. Application is very straight forward and easy, just follow the directions or do a Google search if your unsure. I rounded the corners of my strips down and applied two strips to each of the 12 steps. Wiped the wood down with isopropyl alcohol first and they have done a great job of staying put. Since I don't work with this product, I made the mistake of not wearing any sort of gloves during the installation and while pressing the strips down to guarantee full contact with the steps surface, I tore my hands up a bit until I found a set of gloves so i'd def advise anyone to wear gloves from the beginning during installation. Just inspected them earlier today and after a decent amount of snow this winter and close to everyday use by either myself or the 3 dogs, there isn't a single strip or piece of the tape that is coming up or appears lose. There is also a good deal of grip material with no smooth spots are areas that wouldn't provide traction if needed. Might be a bit expensive to some but its well worth the investment as I've seen what can happen when you slip and fall down steps that are covered in rain and ice.

Love this tape. Holds up for a long time and has really saved me from slipping and falling on my steps. Just repainted porch and steps so time for some more...

I applied this to my deck stairs a couple months ago now and it's holding like a champ even though it's rained 4 out of 5 days ever since. The traction is great. Whatever you want to put this on - it needs to be well cleaned and dry before you put it on. My application to painted wood stairs: I scrubbed with a floor brush, water bucket and a tiny bit of dish soap. Rinsed very well. Dried 24 hours. Quick wipe down with cotton cloth damp with denatured alcohol. (Not too much - don't dissolve your paint!) Applied the tape. Placed towel over it and used a metal roller vigorously. (Eternabond 2Lb Steel Roller is what I used) Things to consider if applying to wood. How recently was it waterproofed? I can't imagine any adhesive would work well on top of a coat of Thompson's water seal or whatever else. In the shade and slick because of moss/mold/lichen stuff growing on it? You have to get that stuff completely off if you want this to stick. Power washer followed by sand paper is what I'd do. I'll try to remember to come back and update this next summer after I see how it holds up longer term. Update! I can't say for sure if the product is for sure still the same.. but it's been FIVE YEARS and this stuff has not come off the stairs. The paint is peeling off the deck but this stuff has stayed. Sure there's a spot here and there that has peeled a little bit but it's still going strong. A+ Changed to well deserved 5 stars. Update 2: 8 years later and I've still not replaced this tape. Missing some bits here and there.. It's not super pretty any more.. but wow 8 years?? Hope they haven't changed how they make it. 👍👍👍

I am using these on the ramp of an enclosed trailer. Especially in the snow, the ramp was extremely slippery, as was the aluminum transition flap at the top of the ramp. I placed strips of this tape across the full width of the ramp, spaced every 12". The adhesive has held up well under rain, sun, and snowy conditions, and sticks securely both to the wood of the ramp and the aluminum transition flap. For installation, sweep and dust the surface thoroughly. Mark guidelines on the surface to help your alignment when applying. Use a roller to press down the product after placement. Or, without a roller, walk solidly on every square inch of the applied tape so that the adhesive is well engaged with the surface. Tip: for this tape (and many other tapes & stickers) you can improve the longevity by rounding the corners before you put it on. Keep those corners and the rest of the ends as clean as you possibly can while installing. If you are going to get fingerprints anywhere, do it somewhere in the middle of the tape. This means that you can get better results if you remove that backing paper starting in the middle, rather than at an end.

You can’t go wrong with this 3M nonslip tape. The adhesive qualities are excellent as long as the surface is clean and prepped it will stick perfectly.