RockShoxFork Service Kit Reba (2009-2011) Dual Air/Motion Control

I had a 2010 Rockshox Reba XX fork that I needed to rebuild, and this kit is MOST of what was needed to complete the task. NOT included in this kit is the dust seals and foam rings that you see just below the stantions. For most fork services all you'll need is that other kit. If you want to tear your fork apart and replace everything else, get this kit. This kit came with Schrader valve cores, Schrader valve caps, every o-ring and washer that I needed, basically everything but the oil! Some forks won't use the whole kit, and mine was no exception, but I used probably 90% of it. This kit also didn't come with anything to service the hydraulic lock-out pop-lock, but barring any kind of damage, that should only require a bleed to service.

This kit has everything you need to service your Reba motion control and dual air chambers. Everything is packaged well and separately so you don't mix up any parts. Make sure to match your new O-rings to the ones you take out of the fork to be replaced. The kit takes time to install so be patient, lube the rings before and after you install and everything will be good.It did not come with the snap ring for the poploc compression knob. I broke mine during removal and had to run to ACE to pick up some new, non stainless ones. I haven't contacted RockShox yet but I am sure they would send one.Other than that small gripe, it's a great kit and well put together.

The item is in fact the RockShox official spare part no.: 11.4015.320.000 (2009-2011 Reba Service Kit (DualAir/MotionControl))The Official Spare Parts Catalog is available on the SRAM website in the RockShox section under the services tab (all previous and current models included). You'll find all the drawings and details over there.I'd recommend also the Dust Seal Kit and with that You might also need the installation tool (If You don't have it already): RockShox 32mm Tora/2009-Current Reba/Recon/Revelation/2009-Current SID Dust Seal/Foam Ring Kit RockShox Dust/Oil Seal Installation Tool (32-mm) (Note that the RockShox official recommended grease is Buzzy's Slick Honey - Which is awesome anyways) Buzzys Slick Honey Jar, 16oz

El técnico que instalo este producto señalo que estaba muy conpleto el kit para mi rock shock reba sl 2010.

All the o-rings are there but they aren’t the correct sizes. Leaks between upper and lower chambers.

This was a great kit that had components labeled clearly in individual zip loc bags, and contained everything needed except for oil and grease, plus it came with one cone-shaped teflon disc with a hole in the middle that I could not identify in any of the RockShox repair manuals for any RockShox models?Now my 6-year old Reba 29er is as good as new!

Después de años sigue trabajando a la perfección.

Excellent kit that solved my problem and maintenance of my Reba fork. Quality product. Just be aware that it does not include the foam washers - check if your model and situation requires also exchange these!

Contains all parts you need to carry out a full service apart from the foam rings and dust seals. Parts are bagged and labeled for the various parts of the fork.

Restituito

Tiene todo lo necesario que necesitas para realizar el mantenimiento a tu RockShox.En mi caso se lo he hecho a una Reba SL del 2009.Todas las piezas encajan son problema.

Trae casi todo lo necesario para hacer el mantenimiento completo de una reba del 2019.Aparte hay que comprar los guardapolvos para barras de 32 , las esponjas de 10 mm para barra de 32, y los aceites de 5w y 15w

Perfect for rockshox reba race with blackbox.