Sunice 12"x20" Sheet Holographic Color HTV Vinyl Roll for DIY T-Shirts Heat Transfer Vinyl Roll Iron on Transfer for Fabrics Heat Press Design

This glitter is such a nice thickness! Not too thin where you feel like it is going to rip, and not so thick that you cant see the cutting lines to weed it. I purposefully chose a more intricate design, and it was SUPER easy to weed!!! The backing sheet is not too sticky either, which is perfect because all the tiny pieces that I weeded out were so easy to remove. It is so sparkly and beautiful in person. I cut it with my Cricut using the settings for Holographic Vinyl and added "more" pressure instead of using the default setting. Such good quality and would definitely purchase again

The media could not be loaded. Cut with my Cricut Explore Air 2 on "Light Cardstock +" setting. Worked perfectly!I found it to be a little more stiff out of the packaging so I used the strong grip mat to cut. The backing wasn't as sticky as the traditional Cricut HTV so I could bend it and weed that way. The tiny pieces (like the sesame seeds) didn't cut 100% of the way thru so they lifted off the backing but the sharp end of the weeding tool kept them in place as I peeled. Cricut EasyPress 2 at 305* for 20 seconds with a thin cloth between the shirt and hot plate. Let cool and carefully peel, then cover with thin cloth and press with iron for a few more seconds. Overall super happy and my child loves the glittering color.

It’s so pretty I didn’t think it was going to work u have to cut it on light card stock not iron on and you have to use a scorch sheet to protect it when ironing on it weeds with no tools if u cut it by directions sent with it will definitely be buying again it’s not as light in color as the picture in the advertisement shows tho it’s darker

I used this to make my daughter's end of kindergarten shirt. It did just fine. I didn't have any trouble weeding. I made it on the Cricut and put it on light cardstock + setting and it weeded easily. I had a little trouble getting one letter to stick to the shirt. I just used the weeding tools to loosen it and then reapplied heat. People mention that it wouldn't stick to the fabric. Make sure your iron is hot enough. and press it down, don't iron. It takes some time to adhere to the fabric, so be patient. I had tiny dots and lines that I was worried about and they stuck fine. Check one corner before you pull the whole thing off. If it is not sticking, add more heat. You also need to pull at an angle not straight. I love how my daughter's shirt turned out.

This is the first time I bought this brand & although it is beautiful, it is very difficult to use.1. I cut it, (with my Cricut Explore Air), on the appropriate setting with a new blade. The adhesive pulled away from the vinyl & wouldn't weed along the "cut" lines, so it to kept tearing.2. I tried again, but this time I put my material as "Glitter Vinyl" so my Cricut would cut a little deeper. This worked for the most part, but smaller block type text (1/4") wouldn't weed very easy, couldn't get the centers out of the letters (A, e & o) & the letters kept coming of the plastic backing.3. Finally, after weeding for more than 20 minutes on a pretty simple design, I tried to iron it on to a medium weight cotton canvas. I followed general rules, as this product doesn't come with any instructions. I had to re-iron it 5 times to get the entire design to adhere to the material.4. For something that would have been so simple to accomplish with another HTV vinyl, this product made it so hard. I wasted so much time & twice as much product than I should have. I am now going to shop for a different brand & hope this doesn't happen again!

This particular patter and color is my absolute favorite to work with! Cuts smoothly, weeds super easy, heats/adheres perfectly, and the color results are spectacular!

Unlike other HTV vinyls I have ordered before this particular vinyl had no instructions when it arrived. By the time I realized they are shown down below the description I had already wasted over 1/2 of the sheet by doing it wrong. I think that paper instructions are important with the arrival of the vinyl. The outcome was good once I figured it out but I feel I wasted my money & time on what I did wrong b/c of the lack of instruction.

This vinyl is great! I should start by saying I’m a complete novice at HTV & the circut in general.. I don’t even own a single weeding tool & I didn’t need one to weed this vinyl what so ever. I took a chance on this vinyl, despite the reviews saying it was hard to work with, to make aprons for a children’s paint party. *Cut this vinyl oncard stock+ (the setting between light card stock & heavy card stock) make sure your image is separated on the back, I found it helpful to roll the vinyl back & forth to make sure my cuts went all the way through & then I peeled the pieces soo easily by hand. You shouldn’t have a problem as long as you cut it on cardstock+

j'ai utilisé pour marque je nom de mes etudiants sur mon uniforme. très bonne adh.rence les couleurs sont sublimes et ca tient bien après le lavage. Bravo j'adore.

to hard to weed

Did not enjoy product, was not easy to weed and did not adhere nicely. Attempts were made to contact buyer with no success. Waste of money

t shirt

Bien trop cher pour la petite quantite. Frais trop élevé pour le retour donc je vais le garder et tenter de ne pas en gaspiller !