BE Pressure 85.400.007 Gutter Cleaner Pressure Washer Attachment

This item it's great! There are obvious pros and cons to using it if you think about it before you purchase it. So to me they are not worth complaining about. The biggest pro is you can clean your gutters from the ground however it is obvious that if you are on the ground spraying anything in your gutter with a high PSI it will likely land on you so to me this is not a complaint worth mentioning. It's just something that's going to happen. If you hate it get your butt on the roof and don't buy this.This item is stellar because it does the job. Now there have been a lots of bad reviews because it spins a lot due to it being a quick connect item. It is also true that it will spin only prior to you shooting water pressure through it but understandably it's difficult to keep it in one position while in the gutter if this thing keeps spinning. So here's how you modify it!! Go to your local hardware store and purchase O-rings and use a size 8.8 X 1.9 mm O-ring (or whatever does the trick) this will give it just enough friction to stop it from rotating wildly (it does not lock it in place and there is still a lil spin) but as I said once you have it set in the position you want when you turn on the pressure washer and use it it doesn't move anyway. Hope this helps. Everyone should be giving this 4 or 5 stars it does what it supposed to do. Im not taking off a star because of an O-ring.I also solve the downward force problem as well I use a attachment at 90° which makes the spray tip shoot to the left or the right instead of straight down. It's spins too so I put a Grommet I cut in half on it (pictured). This mod reduces a little bit the force of the extended wand shooting back toward you. However it is still going to do that so just prepare yourselves and stop complaining about physics people.If you want easy hire someone else to clean your gutters! 😜

Good product-Great tool! For the price you can't beat this implement for a pressure washer. I used it on a 3000 PSI washer to clean gutters and it worked fabulously. I'd recommend no more than a 40 degree tip and you better have eaten your Wheaties before you take on too many feet of gutter. Also - be prepared for a mess and I'd suggest you waterproof yourself before commencing your chore. I had some seriously dirty areas of gutter and this item plowed right through and clean them up QUICK.

I started out using this without goggles or mask on. My gutters were really dirty with a lot of roof grit/sand in it. I put on saftey goggles and a mask to keep debris out of my eyes and mouth, much better but still got really dirty.I had to learn how to control it and get stuff moving. Due to the heavy sand like debris I found I had to start at the downspout and work away from it to keep stuff moving and flowing. Once I got the hang of it wasn't too bad but ad to keep working away from the downspout about 3 feet at a time and then"sweep" the debris to the downspout. When I finished I had about 2+ gallons of gunk that was washed out and piled up at the end of the 1st section I did.It is a workout for the arms as there is a lot of side thrust. Overall it does a good job.

I need to clean green growth off of my siding. I was instructed to not spray up under the siding, that I should be on a ladder spraying down. Since ladders and I don't get along, I ordered an extension spray handle and this bent adapter. Now I can be spraying DOWN on the siding while standing on the ground. For safety reasons, I consider this to be an excellent purchase.

It works. My reason for buying this is I no longer think it wise for me to be climbing ladders and crawling around on roof. 66 yo bones and all.The only thing to be aware of is you will be wearing most of what is blasted out of gutters. Next time I may don a bunny suit with full face mask. Gotta give the neighbors something to laugh at.

Works great with my pressure washer and boosts the pressure. I use this for cleaning the deck under my ZTR, works great and don't have to bend over and kneel in the dirt and water to get the deck perfectly clean after mowing. (Of course, always wait for the mower / deck to cool before using to avoid catastrophic failure of mower parts)

I have a 4K Pressure Washer that I use on almost everything, but my gutters. Then I seen this and thought I would try it - it is absolutely great...I can reach the gutters, with its configuration, you are shooting right into the gutters....priceless. I strongly recommend for use on gutters.

Worked better than expected, and it works much better with one simple modification. If you use this on the end of an extension wand the side force is so high it's frankly hard to manage. I do have a fairly high power pressure washer (3000 psi @ 2.8gpm) but even as a "tough guy" after 10 minutes your arms are sore. So, I bent the rod even further from roughly 140 degrees (stock) to roughly 160 degrees. This cut down the side forces substantially and makes it much easier to manage. Just make sure you do not bend it too far or it will simply spray it right back it you, which is a real safety risk.Attached is the photo after the adjustment. I did several iterations in the seems to be the right balance.Cleaning the gutter is messy but I believe this is the best method of the other (all unattractive) alternatives.

Sprays water without leaking, but very hard to manouver. Hard to get it at the right angle to actually get leaves out, since it just blasts water directly down into the gutter. It keeps turning by itself and doesn't really blow anything out. If you have wet leaves in there, it won't do much. Might work better on clogs from dirt or something. Not worth the trouble.Ended up just taking the thing off, using the sprayer itself and aiming it inside the gutter sideways and spraying out the leaves that way. Worked a lot better and much faster.

I was using this tip to clean the gutters, but they are quite high, so I used it in conjunction with a few extensions. There was so much power that the bend created too much of a backward force, that it was impossible to keep it in place. Great product, just keep that in consideration when using extensions.

Item seemed to be ok quality, however when used the attachment is not water tight.Upon inspection the seal on the inside of the quick connect was missing? I could have swapped out the connector with a spare that I have but it seems like the connector is epoxied on. Now have a useless piece of scrap metal!!

Swivels far too easily to be of much use on gutters.And you can't really use a nozzle with it either because the pressure will send the wand flying (especially if you have extra extenders on it) so you go without and it doesn't give enough pressure to clean properly. There's no happy medium.

Solid construction but would prefer a less angle since I stand under waterjet :(It's required to decrease pressure <500 or kickback will make you spray everywhere.