Oil Catch Can with Silicone Radiator Hose for BMW N54 335i 135i E90 E92 E82 2006-2010 Polished Aluminum Reservior Tank

I have an E92 with the N54 and it fit perfectly. You obviously have to trim the hoses since its a cheap catch can, but once you get it fitted on it works great. Would recommend to anyone who wants a catch can or needs one.

Perfect for the price! Feels solid and thick! You tube for install.

I had to use You-tube for install instructions, but the tubes were the right size, and it all went together fine.The hose clamps provided are crap and strip out if you try to tighten them down all the way. Throw them away, and buy better ones. But the can and hoses are top-notch. I had to trim about 3 inches off of the straight tube. Disassembling the OEM PCV tube was easy with a heat gun. Nice part for half the price of other brands.

I have a 2009 BMW 335xi coupe (E92 coupe) with an N54 motor, the listing says it would fit but the issue is that one of the tubes is way too long and required trimming. The worst part is how the clip that is supposed to be screwed onto the top of the catch can does not fit the bar. I have to find some other way to properly mount/secure the catch can. Despite that, the tubes looked strong and reliable, and the catch can itself looked and felt good, hopefully that translates to doing a good job. Only time will tell and I'll make sure to give an update

Super easy to install took maybe 30 minutes all you need is an Allen wrench some screw drivers to get the hose clips off and a razor to cut the hose. My car smoked on startup before now it doesnt

So installation was awful now keep in mind I am a mechanic that specializes primarily in BMW and BMW performance applications the hose that goes from the heating element on the rear turbo inlet is not big enough I had to use a lot of heat gun and a lot of pressure over a lot of time to get it to fit nothing should be that tight of a fit. Also the mechanism that mounts to the strut barWill cause it to move back-and-forth a lot of the time there really isn’t much depth of the screws that mount on there as well so it’s actually a pretty bad mounting design also after using it for 1000 miles in a heavily boosted and N54 application I found zero oil in the Catch can.....

Solid product at a fraction of the cost of some of the others. No instructions on how to install it were included but you can find that on YouTube. I was 100 percent satisfied with it.

I really tried to optimistic about this product, but it’s absolutely awful to install. The hose is wayyy to long on one piece and to short on the other one to fit in a good spot to mount. Doesn’t fit well at all under the strut bar (burger motor sport twin takes). What really annoyed me is you have to disassemble the old PCV hose in order to get the old clips and connect this properly to the PCV ends, which was a reason I got this because those oem clips were broken so I thought this would come with new clips to be fitted into the PCV connects. Also the provided hose clamps are too small, if you’re gonna buy this, get new clips, clamps and different hoses. Yeah never mind don’t buy this...

Catch can itself looks good but I didn't receive the tubing with the U-bend on one end and didn't receive hose clamps either... just the catch can and one bit of straight pipe