Aibecy Creality Ender-3 Upgrade Magnetic Build Surface Plate Sticker Pads Ultra-Flexible Removable 3D Printer Heated Bed Cover 235 * 235mm for Ender-3/Ender-3S/Ender-3 pro/CR20 3D Printer

10/10 amazing quality!!Here's how to not wreck your surface.Don't use a scraper!wait until the bed is cooled down before you try to remove any prints,Do not level the bed while the nozzle is hot, to avoid making shiney lines on the surface

Took it out of the bag, yay .. all clean and yay! .. Put it on the bed and levelled it as i always do, levelled fine no issues at all, ran a test print . . . Within 2 hours i decided to remove the print from the bed, and by remove the print i mean try to, it was stuck fast, so fast that it was a struggle removing it from the bed?In all my days of printing, I've had perfect adherence, bad adherence, and this surface ... If this was Goldilocks, this would be the porridge that was so hot when she took a bite she burst into flame, it's ridiculously hard work to peel prints off.. did I say peel? I mean hammer and chisel off, it's a nightmare to deal with. The pricetag is fine, all i need is a surface i don't need to fire up or sandblast to remove a print from, and the print was that hard to remove, that removing it causes dints in the surface.. it's absolutely insane. I've bought official Creality surfaces, and some copies, the originals are always best but i need price + reliability but unfortunately, this has the price, but wouldn't last a week the way it is.Shame too as I'm now down a surface. The price is nice, the adhesion is way too much, and easy to remove prints? i still can't get the last skirt off of it, and the dints on the mat after cooldown, suggest these things need to be handled with care, or use a release spray or something, i've never had to with official Creality magnetic surfaces, but this one ... oof

I brought this 18th June 2020 and the surface has just torn away in the centre. So it's lasted just under four months. Not impressed at all.Very disappointed with the mat all along as the adhesion has been too strong. It's been a major effort to get models off the mat as they constantly stuck. I know most people have trouble with adhesion, mine is the other way.The mat is magnetic and does stick to the plate, but lasting less than four months is rubbish.I do a few models a week so this is not good. Need to find a better mat than this one.Rob

bought 2 of these, have two creality printers ender3 pro and the cr 20 pro. Neither of these mats offer any adhesion the prints just lift off the plate even when using an adhesive. the megnetic mat on onefailed to work.i can understand a problem with 1 mat, but both mats something is wrong there. would not reccomend

I bought this magnetic bed based upon previous reviews and recommendations from various online sources that a magnetic bed would print great and make it easy to remove printsThe bed is in 2 parts a magnetic source that you stick to the metal build plate and the magnetic build top.Installation is very straight forward.The bed appeared to heat to desired temperature but would lose the heat,Prints were literally peeling away as the filament was being printedI tried increasing the heat and eventually got the filament to stickNext issue the models were difficult to remove and required alot of force to removeI tried printing various pla models and each had the same problem, printing with various supports, brims, rafts and each were difficult to remove or would not stick to the surface

Got this to replace one ruined in a 'z offsetaccident'. Adhesion is good...a little too good with petg (240/60 degrees ) and skirts /brims are a pain to remove and I need to bend it and use scraper(didn't need to use scraper with the stock one)...multi layer objects objects pop off really easy when bed is cooled tho.Until I've worn it in will use a coat of dilute Woodglue to make release easier(TIP also helps for adheasion... not that this pad needs additional adheasion)

I bought this and the very first print, after removing it, caused a high spot to appear in the surface. It's hard to see from the pictures but basically:1. The parts stick really well to the upper surface. It's great.2. When removing the stick part from the surface, unfortunately permanently warps the top surface causing high spots all over the top surface.If the first two above aren't bad enough the top surface doesn't stick to the lower magnet enough to prevent large parts from warping. The plastic sticks really well to the top surface but when the part cools it pulls the top surface from the lower magnetic surface and you get massive warping of your larger parts.I can't recommend this because other than your first initial excitement of good top layer adhesion, reasonably easy removal of the part from surface you quickly find out it's fatally flawed.

Great quality surface to replace the one which came with my Ender 3.I had previously moved to printing on glass for PLA but moved to PETG and couldn't get any adhesion whatsoever! So I tried using my old damaged surface and instant adhesion... Buying another was a no brainer!Note that you'll need a magnetic print plate to use this, it won't work with the likes of ceramic etc. and doesn't come with a magnetic sticker to place on your build plate.