DEWALT Circular Saw Dust Collection Adapter, DWE575/DWE575SB Compatible (DWE575DC), Black

Does a decent job keeping sawdust at bay. Doesn’t catch everything with the open circular saw as you’d expect. Fitment was great on my dewalt saw. Vacuum hose fits right up to it as well.

Works great on dcs575 FlexVolt saw. The adapter has an opening for the dust chute so that the chute will still work with out a dust collection vacuum hose fitted on. When I use the hose I like to tape over the chute opening if I'm not using a powerful vac and the dust collection works even better. It would be nice if there were a cover that could be slid open and closed. I mostly use a cordless dewalt vac and that's when I use tape over the opening. Fits on to the saw easily although the drawing in the instructions shows a locating tab and the illustration isn't accurate but it's easy to figure out. Look at the saw port and look at the inside of the plastic parts that fit onto the saw and it explains it's self. There are 2 plastic screws (ph2) that clamp the 2 parts of the adapter together. One of the installation screws is only accessible from the battery port side and is better accessible with an angle drive or a ¼" bit-ratchet but I was able to install mine with a normal screwdriver handle well enough by driving with the bit at an angle in the screw recess and additional pressure into the screw recess. The part is abs plastic and seems durable enough but could be cold welded with acetone if it ever breaks. It comes with an additional lower guard lever which must be installed for the lower guard to work with the adapter as the adapter protrudes enough on the side that it is in the path of the stock guard lever. The guard lever that comes with he adapter looks just like the stock one except has a bend to angle the tab out away from the adapter. and is easy to change out with a t-25 or with a slotted bit screwdriver. The guard levers are stamped steel but are hardened and are very tough. I tried to alter the angle of the one that came with the adapter slightly with pliers but was un-successfull. It could possibly be done with a vise but the angle is fine as is. I hope this is helpful.

My DeWalt battery powered saw - DCS 573B does not fit the collector. It kind of works with a lot of force and tape and I am going to try silicone. The saw is not powerful but it just fits my needs and if I can seal up the leaks, then it will be just right for working in my basement. But some place on the internet listed my saw as a fit. Good Luck

LONG STORY SHORT:When looking for a dust collection adapter for my "DEWALT 20V MAX 7-1/4-Inch Circular Saw with Brake, Tool Only, Cordless (DCS570B)" it was really difficult to figure out IF there was even adapter for it. THIS ADAPTER FITS even if it's not listed as one of the saw options in the description. Works great!PROS:-Fits perfectly on my DCS570B circular saw. No issues, gaps, jerry rigging....it was made for this saw as well, it's just not listed as one of them.-Ribbing/Ridges on the back of the port connect great with my Cen-Tec adapter system (as shown in photo). Holds them on tight.-Side port allows for dust to shoot downward instead of backward...if not using dust collection. Making the saw still function as originally designed.CONS:-Figuring out what (IF ANY) dust collection adapter would work with my DeWALT circular saw was a chore. It's not listed as one of the "options" in this description, nor is Dewalt's website helpful in the matter. I had to make an educated guess based on information I'd seen...and it worked out.-I wish there was a little sliding door on the side vent, so you could close it, when you're connected to a dust collection system. Not that it really seems to make a big difference, but it's hard to tell, and would be a nice option. However...any moving parts and pieces are liable to break...which is probably why they didn't bother.CONCLUSION:Buy. Fits perfectly on my DeWALT cordless DCS570B circular saw, and is incredibly effective (with my Cen-Tec system) in greatly reducing the amount of dust in my woodshop.

Having a dust collection port on my circular saw is very good thing. This really captures the sawdust from the blade. It can't imagine not having this now. I'm not covered in dust when I use my circular saw.

Got this for my DeWalt DCS570 20V XR circular saw. It fits, even though it isn't specifically listed as a compatible model. One of the screws on the attachment has to be install using pliers or something similar, since the screw head isn't accessible (on my model at least), you can see what im talking about in my photo(s). Im using this attachment with the DeWalt HEPA extractor and it minimizes dust very well. There is still dust that escapes out the front of the saw, but its a huge improvement over not having it. Quick connect hose hooks right up to this attachment for easy use. Overall. worth the price if you're trying to reduce dust.

great saw. a work horse