Alopee Pack of 2 1156 BA15S 7506 1141 1003 Canbus Error Free Yellow LED bulbs,9V~30V DC 35pcs 3030 Chips No-Polarity Turn Signal Blinker Bulb

Very bright and the first ones of 3 that don't cause hyper flashing on my wife's 2019 KIA ceed.

Bought these for my T5 van. I wanted LEDs because I keep blowing the regular bulbs in the rear (not weekly, but certainly once or twice per year) which is a pain and I figured that it might be worth trying LEDs instead.These are pricey compared to simple bulbs (hence dropped a star), but they are bright and they work on the T5 Canbus so I have no hyperflashing warning in the cab when turning. I tried three other "canbus ready" bulbs and these were the first that worked for me.Others have commented about how bright they are, and they sure are, but the yellow diffuser on the T5 rear light cluster seems to flatten it quite well, so I am not worried. No plans to change the front bulbs as they have never blown.

These are really bright and do not hyper flash most of the time. Unfotunately these days with warm weather of over 30 degrees celsius there is a problem at times. When you drive in city and get into some traffic jam(5-10 minutes) and have to use the signal as you will make a turn they start hyper flashing. When turning signal is not used for something like 5 minutes they recover. I use 2xT20 and 2xBAU15S of these. It seems like they overheat and need to cool down. Until now they have not burned. Previous attempts with other bulbs with no hyper flash resistors inside lasted for 5-10 minutes before burning, but I hope for these the only problem will be with the hyper flash.

Very fast delivery, I put them in the front of my MGTF first because I had read reports that they would hyper flash if they were put in front and back, and it would be very difficult to put load resisters at the front, so that was my first choice. Well, the front had perfectly normal flash rates. I then put the second set I bought in the back lights and also perfect flash rates, including all four with the hazard lights on. Extremely pleased, it saved a lot of faffing about with load resistors, I hope they last because they were quite expensive by my reckoning.[EDIT] It's now a few weeks on and I did get hyper flashing because one bulb had failed, this was quickly replaced by the seller and everything works perfectly. It's good to know that if a bulb fails you will be alerted to this by the hyper flashing, the same as incandescent bulbs.

I was sceptical of buying led bulbs as in the past I've tried and they've not worked. But these worked perfectly, the Oem indicators are really bad on the car I've just bought I own a 2015 Seat Leon St with the Led sidelights and headlights. No bulb warnings or this hyper flash thing I've heard. Great product, I will be buying more for my front headlights too eventually

My bike has great indicators now, and the filaments can’t keep blowing with please LED lamps. Does the job really well. 😎🛠

Absolutely fantastic bulbs. They work a treat and are super bright. Ordered two pairs, one bulb unfortunately developed an error after several weeks. My job requires me to use hazard lights quite a lot. After few minutes, the heat around the bulb affects internal resistance thus resulting in decrease in brightness and intermittent canbus error (flash rate too quick). It happened to 1 bulb only so I take it as a 1 of fault in production. Otherwise absolutely fantastic

Used in a Nissan Qashqai, which had hyper-flashing when I tried other led bulbs on the front. I had fitted led to the rear, but needed resistors to stop the hyper flashing in those. Fitting resistors to the front wasn't an option as the bulb holder twist off and doesn't have any wires coming from it, so thought I'd give these a try. Very bright and will be ordering two more to replace the rear LEDs as the resistors can get very hot if the flasher goes for a long time, like hazard flashing if you break down. I can then remove the resistors when I use these bulbs. I would recommend.