Sherman Replacement Part Compatible with Honda Civic Radiator Support (Partslink Number HO1225104)

The fitment is good, but it's so thin you will have trouble welding it up.Consider bolting it on, many others have had success as long as you use bolts larger than 8mm in diameter and evenly distribute the load with enough bolts placed around the frame rail.Forget about jacking it up from the lift point. The factory core support could barely do it, and this one most certainly will not.

I bought this for my 1994 Honda Civic VX hatch. It fits up well, but the material is definitely thinner/weaker than OEM. All the holes and slots are intact and appropriately spaced, however since the support is thinnrr/weaker, the front jack point is 100% worthless. I drive VX, which is the lightest model, and when I attempted to jack the car off the ground, the entire jack point caved in, and if I wouldn't have set it down in time, it likely would have caved the whole support in. Moral of the story, if you don't need your front jack point, it's fine.

It works but I had pull on it to fit Becuase the bolt didn’t match up prectly

A little thinner than the original OEM part. Not bad. Had holes and threads in all the correct spots.

A few dents on the upper fender mounts, but nothing that couldn't be tweaked back to stock. Everything else lined up perfect.

Fit right on no problem. On a side note for anyone thinking about doing this job. There are a sh$@ load of spot welds it's not an easy task. Great product though

The radiator support came damage. it was very Poorly delivered. It was kind of too big for the box I noticed that the box didn’t Have a sticker that says fragile. Even after I tried to do a fitment To see if this still good it seem to be a little bit short on the alignment.

Fit right on no issues other than tearing off the factory one. It's just a cheaper grade metal than factory.