Jirvyuk Led Channel, 10 Pack 1m/3.3ft Led Profile Strip, Led Aluminum Channel and Diffuser for LED Strip Lights with Milky White Cover, End Caps, Metal Mounting Clips and Screws- Silver (U)

The media could not be loaded. Very sturdy. Although no instructions included in the box...they are online in the amazon section. I had to fit 7.5m across 3 walls. I purchased a 10m pack of this trunking...7.5m of LED lights and an extension lead. My advice is to 'measure twice cut once'. Use a good quality hacksaw for mitring corners. Cheap bladed saws bend and give a poor cut finish. Listen...you can use the screws and wall plugs included. I drilled my first hole and stopped. Couldn't bare having upto 20 holes in the top of.my wall which will need patched in in years.to come. Sorry to.mentiom another product here but I used size small command strips...the white velcro ones. I cut them in half length ways and used two per length of conduit. No mess. No fuss. So o recommend fitting with command strips.On the negative side...but could be a plus...it is tricky to click the plastic diffuser cover on. However...there is a knack to it...once u work it out it fits OK. I used the handle side of a pair of large scissors to force once side in. Easier shown than explained. Now I've done 1 room...I will have no issues doing more. A good product.

Works well for LED tape under kitchen cabinets, the extrusion is quite thin but there is enough of it to keep it's shape and to act as a heat sink for LED tape. Diffuser installs nice and easily and is a good tight fit. I didn't use the mounting clips but opted to drill and counter sink a whole every 20cm so I could screw directly through into the underside of the cabinets making a neater finish.

Product is really good! Easy to cut and put up as you need, but beware I bought these for a set of Govee strip lights which fit in the channels perfectly, BUT they don't like turning corners at that angle, so feeding them through the corners in situ was next to impossible as there isn't 10mm height in the corners to turn the strip lights on their side.As a diffuser, they don't completely difuse the lights I chose, you can still see the spots but they did help, and the covers make for a neater finish than the exposed strip

We'd bought some led strip lights for under our kitchen cabinets, however they started to un stick. This trunking was so much cheaper than Screwfix and does a great job. Easily cut with a hack saw and mounting clips were easy to use. Would defiantly buy again in the future.

Just what I wanted to fit in our older caravan, looks really neat and tidy fitted. Holds the LED rolls of lights. More than enough length to be fitted to ceiling each side of our caravan which is now lit up on both sides much better and more economically than before. What a great improvement now when we travel.

The media could not be loaded. Well packaged coming in two boxes one contained in another, all of them are perfectly straight, the plastic covering also has a protective plastic film which you would peel off after installation, which ensures they aren't marked.You can see where you can easily connect them next to each other for a continuously line or use the end caps to have separate independent sections.The clips are quite nice and you get lots of them, so you can carefully align them up to where the lights need to be on the wall or ceiling and then its just a matter of sliding the LED lights into the enclosure and then pushing it onto the clips.I'll put up another video once I get round to setting everything up.

Bought 2 lots and it works and looks great with the LED tape lights. Used strong 3m tapeTo attach to wall instead of supplied fixings. 1st pack the plastic covers fitted fine, 2nd pack some seemed looser that others and do fall out if knocked. But as it’s up around the ceiling this shouldn’t happen to often. I may ad a spot of glue if it does.

I got this channel to mount in the corner of a room to emphasize shape around a fireplace alcove. While turned off, the channel is barely noticeable between our green and peach walls.While turned on the milky white plastic helps to take the edge off the LEDs, full brightness is still a little sharp but utilising a cheap dimmer switch and bringing the lights down to around 60% makes a lovely inoffensive ambient light that isn't harsh to look at directly.This channel was the only one I found on Amazon that I felt was suitable and I wasn't disappointed. It's easy enough to cut to size using a junior hacksaw.