Can AM Can-Am Maverick X3 X DS RS Turbo R Max 2 Door 4 Door Models Custom Door Latches"Stainless Steel"

not to hard to install

Installed on Can Am Maverick Max and so far they are a nice addition compared to the straps from the Factory.

Great design, I have tried 3 other styles of handles and none even worked. These are easy to use and install, comes with the right hardware. There are no instructions but you do not need them. I will give a brief step by step.1-Unscrew the only bolt holding the triangle piece where your stock red pull strap is.2-Remove the plastic3-Drill out the black rivet with a 1/4 metal drill bit. pop rivet out the back.4-Handles are side specific and have a notch that is rounded to fit the handle of the silver piece you removed the stock red handle from. Make sure to install your stock plastic piece before you bolt you new handle on if you chose to. (We did not)5-Slide 1 bolt into each hole of the handle, one at a time with the threads towards the door.6-To install the nut, pull the lever that opens the door into the open position, while holding the bolt in place with one hand, this puts the handle in a position that you can screw the nut on easily and without fighting to get it behind such a small space.7-Use a small wrench on one side and an allen wrench on the side towards you to tighten.They will work with door bags with the knee pads if you tuck the knee pad behind the metal bar.Such a great product. Wish they had them for the rear.

They look really good and work well. They are exactly as described. However, they feel a little flimsy and I won't be surprised if they get bent. They are still better than the stock pull strap and are worth the price. Install was simple and with a little trimming and patience I was able to put the stock plastics back on.

Install upside down they work very well, I used a Dremel tool.

The media could not be loaded.  So much easier to open the door and eliminates the odd ergonomics of the oem strap

The absolute best upgrade to my X3. Wish I would’ve done this immediately after buying it. It should be your very first upgrade. Not difficult to install. You need a dremel, razor blade, maybe some files. Your factory plastic beautification cover over the door latch has to be trimmed a GOOD BIT. all of this is hidden when the door is closed. I have chupacabra door bags and these door handles work fine with them.

These are absolutely gorgeous. A full 1/8" thick, Lazer cut (?)... I couldn't be happier, especially for the price.