Viozon Monitor and Laptop Mount, 2-in-1 Adjustable Dual Arm Desk Mounts Single Desk Arm Stand/Holder for 17 to 32 Inch LCD Computer Screens, Extra Tray Fits 12 to 17 inch Laptops (Silver)

I did a ton of research and read countless reviews before deciding on the Viozon OL-3L. I’m extremely pleased with my decision! The quality of the product is fantastic, instructions were easy to follow and understand, and the finished result is exactly as I had hoped it would be. You can tell that a lot of thought went into this design, making it sturdy, easy to assemble and added features such as the cable covers and clips. Overall, I would highly recommend this product to anyone, and will be purchasing a second one for my office!A few tips that I would recommend are:1 - Make sure that you have enough of a lip/edge on your desk. The wing nuts that are used to clamp the mount on the desk are pretty wide and the bolts are long. I was unable to mount it completely flush against my desk because of this. Fortunately it wasn’t a deal breaker and is still very secure.2 - Read the instructions thoroughly BEFORE you begin and lay out the hardware, ensuring the correct position of installation. I even went as far as labeling the hardware with the corresponding letter ahead of time to ensure accuracy, as this was not done in the instructions. Also, you will not need any additional tools, everything you need is provide.3 - Go ahead and mount the monitor bracket to the monitor before starting the desk installation. I found that doing this first was easier. Also, as I read in other people’s comments, don’t be surprised if the monitor mount looks crooked after installation. I was concerned of this when I read the reviews - and I did in fact have the same issue. The good news is that the arms have 3 points of adjustment, so you will easily be able to straighten and customize the angle of both, the monitor & laptop. The tension adjustment points, especially “The Adapter (E)”, intentionally have quite a bit of tension, making you think they can’t be moved, but they can - check out Step 6 of the instructions.4 - The positions will feel a bit off at first when you initially get everything set up. You will need to play around with it until you get the desired positioning.

I am completely happy with this Viozon Computer and Laptop Mount. It is exactly what I needed to get my monitor and laptop off the desk. I was concerned with some of the reviews, and want to reassure others.1. The brackets that hold the laptop to the laptop shelf do not block either a MacBook or Dell PC ports—not at all. The brackets are only 1/3 up from the bottom and both laptops' ports are in the top 1/2 of the laptop. (One reviewer showed a photo of a PC that is a few years old and the ports on it were being blocked. My 4 year old Dell XPS 15 and my 2020 MacBook Pro both fit the shelf fine.)2. The VESA mount has been modified by Viozon so it fits LG monitors. LG has the screw holes in a depression, and the VESA mount has been designed to fit this. No trouble at all screwing the mount into the back of my 32" LG monitor. (Several people complained they could not attache their LG monitor.)3. Several reviews complained the VESA mount was crooked, so when the monitor is mounted it is crooked. My monitor was also crooked until I sat down in front of it and swiveled it. It easily swivels so it can be straightened, and it stays where I want it to stay. I don't know if they redesigned the mount, or what. But it sets up perfect.4. Some reviews complained the laptop shelf moved too much to type on it. That is probably true for most, but does not affect me. I have a MacBook Pro and a Dell XPS 15. I use an external keyboard (Logitech K850) and mouse (Logitech M720). These two devices can be paired with 3 computers (or 2 computers and a phone). So I never type on my computer's keyboard unless I am traveling with it/them. The Dell sits on the mount shelf and the MacBook sits on another shelf. Both are to the side and my formerly cluttered desk is free. In the photo the grey switch on the desk between the MacBook and the left speaker is an "ezcoo HDMI 2.0 switch 4x1." Both laptops connect to it by HDMI, and it connects to the monitor. I switch between 1 and 2, depending on which laptop I want to appear on the monitor. Then I press a button on the keyboard and one on the mouse to switch control to that laptop. Easy-peasy.5. I read 2 reviews complaining the monitor mount would not hold a large monitor, and the monitor leaned forward. I have a 32" LG monitor attached, and after 3 days it has not moved at all. I feels very secure.I am completely happy with this purchase. I will update this if something changes.

I've had this arm system for about half a year now give or take.First the PROS:- Stable. I have an ultrawide monitor on one of these arms straight out and it doesn't wiggle. It's a well-built system.- Plenty of cable management options. I should probably make better use of them, but there are a bunch of loops and hollowed out sections to run cables to your devices.- Solid base. There are 2 clamps on this which do a great job of distributing weight. My desk has a cross beam that was a little too close to the back to be able to comfortably accomodate the base. I fixed this with a small wood block which ended up doing the trick and its solid steady now.- Laptop arm has great padding and a decent amount of access to side ports through the grips. I have 14" and 15.6" machines, both of which comfortably sit on the arm. Max weight I've tested has been around 5 pounds.CONS:- Not extremely flexible. As opposed to a pneumatic arm or something along those lines, there are essentially 2 arms on this, each about 12" long, with a rigid ~30° angle in the middle. You CANNOT adjust the angle between the arms, so you need to get creative with the height of your arm placement, especially if your extra monitor is an abnormal aspect ratio.- height system is a little less "locked in" than I'd expected - each arm has a collar that sits below it, as opposed to an internal locking system.- rotating your laptop on the laptop arm can cause some awkward angles. Not great, as it's one of only 2 or 3 axes you can level it out with a main monitor.All in all its a good system if you're not looking to spend several hundred dollars. I frequently trust it to hold a few thousand dollars' worth of equipment and have no doubt in its capabilities.