DEMON UNITED Complete Ski Tune Kit with Wax and Brush Kit- Snowboard Tuning Kit

Great product! Compared a lot of different kits and this one seemed to have everything you could need and was definitely the best bang for your buck. Long time boarder who was tired of paying for wax and tunes so I got this kit. Instructions are easy to understand. Comes with everything you need. The temp control on the iron works great and I’ve never had a problem over heating or under heating if you falling the suggestion on the wax you buy. The kit pays for itself it just a few waxes. Takes a little practice but I’m already waxing at the same level as a board shop. Highly recommend

I bought this before the snow season because waxing/tuning 3 boards and buying this set would cost basically the same amount of money. The tools were easy to use. There are dozens of how to guides on youtube about how to wax/tune your own board/skis. The iron heated up quickly and I had to actually turn mine down to medium low in order to not burn the wax. I made sure to lay down extra newspaper around my board/workspace, because there's a lot of wax shavings that will come off your board once you're at the wax removing/scraping stage. On the wax bar, it's divided up into thirds. I used one third of the wax for 3 snowboards. It wasn't a very hard process, and was actually rather relaxing being able to do it myself. my only advice? When you're scraping wax off your board, use gloves because the metal scraper is fairly sharp all around - I had cuts on my fingers of both hands without realizing after I finished scraping one board down. do NOT check the snowboard/ski edge sharpness by running your finger along it either. You can use the back of your nail - if you scrap your nail across the sharpened edge, nail bits should come off when the edge is sharp enough.

This is a very good kit. It would be nice to include a base cleaner. Also, when using the iron first time, make sure that its power output is set to correct input voltage level (120V/230V). It was set to 120V when I received it, and I switched it to 230V for the UK mains. There is no warning on packaging about this, but this might be important not to damage the iron.

The product was as expected.

Really happy with the product. Use it to apply glide wax for cross country skis. Has the instruments to sharpen edges on downhill skis or snowboards.