BIQU CryoGrip Pro Frostbite Panda Build Plate for Bambu-Lab P1S P1P X1C X1E A1 3D Printers, Cold Printing Build Plate, Double-Sided Textured Spring Steel Sheet, 257x257mm, 1 Piece

I have two kobra 3s and one of them had a z-axis calibration issue which caused it to remove all of the top textured of the original build plate in a 2" diameter circle, so I needed a replacement build plate. I had been reading about the cool plates so I decided to try this one (CryoGrip Pro Glacier). I was really interested in not having to use any sort of bed adhesive, like glue sticks. I hate having to remove the glue stick residue from the prints, it's not hard, it's just a pain.When this build plate arrived, I immediately put it on the printer and printed a benchy, because it's fast and I knew what to expect from the printer. It printed great, no bed adhesion issues. I've used this plate daily for almost a month and I have not had a single print failure due to a bed adhesion issue. The models just stick to it. As a matter of fact, they stick almost too well to it; I've had to start using a metal scraper to remove some models (gently of course).According to the instructions, the bed temperature should be between 45 and 55 degrees C for PLA and the default temp for pla on the kobra 3 is 60. It's easy to adjust the bed temp on the kobra 3 and I have managed to change the default temp to 45; however, the default doesn't stay at 45 for more than 3-4 prints before it's somehow back to 60. So I just try to make sure it gets changed to 45 every time. However, sometimes I miss it and the temp isn't adjusted the bed temp is 60 the whole time, I haven't found that has had any impact on the quality of the prints.This plate is textured, however, it is finely textured, it's not quite smooth but it's pretty close. There is a very noticeable difference between the feel of models printed on it versus those printed on the textured plates.I'm very happy with this plate. I actually ordered a second one about two weeks after I ordered the first one. These are now my go to build plates.

The media could not be loaded. So far so good. Insane adhesion and really fun look. Been running a number of prints on it already and in the midst of printing my daughter a recorder even with printing a narrow tall structure and shacking the snot out of it, it held on. Wish they had a plate specifically for my SV04 but this size is manageable and the plates performance is AMAZING! Looking forward to trying on the SV08. Review to follow if I do.

I bought the lighter blue glacier version of the build plate. I print primarily with ABS and the plate adheres normally at 100C. At lower temperatures than 90C, the purge line doesn't even stick. At 90, it sticks, but tends to de-laminate from the plate at higher layers. This is higher than the plate's advertised functional temperatures for ABS. I don't use PLA so I have no results with that.This plate still gets five stars because it has such a great surface texture and it imparts a surface with a smooth feel, and lustrous dimples. That surface feels good in my hand and looks good in the light. My OG build plate had a hole in the surface so I had to replace it and this surface is better.

Absolutely phenomenal. Excellent layer adhesion with PLA, PETG and TPU. I haven’t put too much stress on it as a cool plate but preliminary small tests worked just fine. And it looks super cool!

I was extremely let down by the plate from this particular brand as it failed to withstand regular use for even a week, with less than five prints completed before encountering a significant issue. Despite carefully ensuring that all settings were optimized for the cool plate, the first layer unexpectedly began to peel up from the middle. This unexpected occurrence not only disrupted the printing process but also left me feeling disheartened since I had high expectations based on the positive reputation of the brand. The short lifespan of the plate and its immediate malfunction significantly impacted my experience and cast a shadow on the initial excitement I had felt when starting to use it. It's truly disappointing when a product that was highly recommended and anticipated falls short of expectations within such a short timeframe. ** will update with a photo soon

This plate is actually incredible. Keep in mind, you'll need to make sure you've updated your printer settings to use this. Temp changes are not a big deal, I found I needed to adjust my Z-offset because of how my SV08 uses on off-plate sensor to calibrate this. Perfect adhesion with ABS, PLA, and PETG so far.Leaves a smooth surface, and has effortless release if you allow it to cool.

I've printed a out 6 times on this plate and I've found that printing at 50-55 degrees is best. If you chose the cool plate option which brings the bed temp down to 30 the prints do not stick. I've had a couple of failures due to that. Plate works but not as they say and I don't see much difference yet between this plate and the factory sent plate but I'll keep using it and testing. As of now I'm working on a big print that will take a total of 100 hrs and all's well so far.

Works okay but per it's documentation doesn't run any cooler than the stock Bambu plate.