OTUAYAUTO Front Windshield Washer Nozzles - Replacement for Chrysler, Dodge, Jeep, Ram - Replaces OEM #: 4805742AB, 4805742AC. 5113049AA, 55077460AA, 5303833AA, Premium Spray Jet Kit (pack of 2)

It works fine, I installed them on my 2008 Chrysler town and country and the spray was too low on the windshield. But I was able to adjust the angle of the spray by cutting the included spacers. Wiper fluid leaks a little on the hood but otherwise it’s effective. I’d still recommend it over the expensive OEM ones.

⭐⭐⭐⭐⭐I couldn't be happier with the Front Windshield Washer Nozzles! They're a perfect replacement for my Chrysler vehicle, fitting seamlessly and functioning flawlessly. The premium spray jet kit ensures a strong and consistent spray, effectively clearing my windshield for optimal visibility in all conditions. Plus, with a pack of two included, I have a spare on hand for future use. The fact that they replace multiple OEM part numbers adds to their versatility and value. Installation was a breeze, and I'm impressed with the quality and durability of these nozzles. Overall, a fantastic product that I highly recommend to any Chrysler, Dodge, Jeep, or Ram owner in need of reliable windshield washer nozzles.

Very easy install. Does spray a little low compared to the factory nozzle but the wiper blade pushes the fluid up and cleans that whole side top to bottom just the same.

I was able to easily replace the tube on one of my daughter’s windshield wipers and it works great.

You get what you pay for. 80% of spray goes on hood when car not moving. 100% goes on hood when moving. Only spray that goes on windshield is whatever bounces off hood. I would return then but such a pain in the arse to install I will just let them break, which they will do in short order, and replace them with something that costs more than a Starbucks coffee. Lesson learned. Don’t go cheap.

The media could not be loaded. The nozzles are the same style, design, and fit as my factory Dodge (2013 Journey). They are extremely easy to put in, literally just snap into the holes and then you reconnect the water line tubing.If you are even slightly auto tech savvy these are a no brainer and a simple repair/replacement.If not it will take a little thought and work to remove and or re-install tubing especially if replacement tubing is needed but entirely doable without the need to take your car to a shop and pay (usually $50 or more) to have them installed.Unfortunately in my case the water spray from the nozzles are not lined up correctly for my car and windshield. They work, however the water spray is not fanned (1), not even (2), and it doesn't reach the center (or even low center) of my windshield (3) as stock (OEM) nozzles do.(1) Water spray is not fanned means the spray of water is not in a fan shape or spread across the "stream" of water. I'm staying away from the word stream because it is Not a stream of water Nor are windshield spray nozzles supposed to be a stream. They are supposed to be a fan of evenly distributed water across that fan shape so as to cover a wider/larger area of the windshield. Some car's windshield nozzles may spray more of a stream but will still be in a fan shape to help cover and wet down a larger area of the windshield. In any case not being fanned and the spray leaning more towards a stream of water is not necessarily a bad thing as it still provides the same volume of water and the saturation amount may be equally as important as coverage of area (fanning).(2) The water spray not being even refers to the fact that on each nozzle the water spray is not evenly spread across its spray of water. From a nozzle more water comes from different areas of its spray/"stream". As in, one side of the water spray has a larger amount of water coming out than the other portion of that same water spray.(3) The water spray barely gets to the bottom of my windshield and most just squirts my hood or under the windshield wipers. This may be due to the fact that these nozzles cover a very wide range of car makes and models and will fit since the holes they fit in are all the same. However, some makes and models of cars may have their wiper nozzles further or closer to the windshield, than others, meaning the distance from where the nozzles sit to where the hood ends, and windshield begins, may be different. Angle of hood & the angle of the windshield will play a factor but for most, if not all, the vehicles listed that it will fit will all have extremely close/similar specifications. I even tried to move or adjust the nozzles to see if I could manipulate the water spray or move it to hit higher on my windshield but to no avail. The distance from the nozzle to the edge of my hood is 5" (pictured).The distance from the nozzles to the middle of my windshield where the OEM nozzles sprayed, and optimal location, is 24" (pictured). The spray from these nozzles only get to almots16" (pictured) which is too low to get full/best coverage.They are a good value for their money if you are willing to risk a potential less than optimal spray location (maybe yours will work better than mine did).They Do work and they Do spray the windshield but may not do so, well enough, to help properly clean the windshield, as in my case.Only recommendation I could give is that if you have a distance from the nozzle to your hood edge and/or distance from the nozzle to the middle of your windshield similar to mine then you may have the same performance and may want to look at other companies instead, or just eat the cost of an OEM pair from an auto parts store or your car's manufacturer dealership.

Very easy to install and perform as expected.

Bought these to replace the broken one on my 2013 ram 3500, be careful though they are quite brittle as i broke one putting it in but i am also slightly heavy handed

Easy fit and install. Works as it should. Less expensive than OEM , great!

Muy útilLo recomiendo

the fittings were not in the package as advertised

I went to an auto parts store to buy an OEM replacement, could not believe the price they wanted, so I took a chance at these ones. So glad I did, very easy to install and the spray is great, very even on both sides. I definitely recommend buying these.

Product fits our dodge grand caravan 2019 well.Pros:-Dodge was charging $45 CAD for the same product, so the price of this product via amazon was very competitive.-Fits our van perfectly and comes with 2x rubber gaskets if required to ensure the product fits snug against the hood of your vehicle.Cons:-The product is pretty cheaply made and upon inserting the first spray head into the hood, one of the secure tabs broke instantly. I only needed one but based on how easily the first one broke, I don't expect the other to hold up for long.-The spray distribution is not great, for our caravan it simply hits just above the wiper blade when it is in the down position, and nothing above that area receives washer fluid.Takeaways:-Affordable, fits with extra pieces to ensure a good fit but cheaply made and unlikely to withstand seasonal changes.. You get what you get!