Creality Ender 3 V3 Plus 3D Printer, CoreXZ 600mm/s High-Speed Auto Leveling Direct Drive Extruder Stable Metal Build Tri-Metal Nozzle Ender 3D Printer Large Print Size 11.8x11.8x13.0in

Really nice printer... I've been using it for a couple weeks now and printed many things... The best thing to do is to get a dryer along with the 3d printer... It will improve your prints greatly. Also learning to fines the settings helped a lot. I saw a big difference in PETG print quality just changing the temp of the hot bed from 57C to 56C...I recommend downloading other peoples 3d modles from online sources like [Printable.com, makerworld.com or thangs.com] for the door hinges, front plate, exhaust fan upgrades and (riser plates (if you intend on using CF filaments)) to get started and learn about how the cad models work and need to be physically one piece for the Creality Print or Cura to work with them. Most software can only do so much to "repair" models someone might create in Blender... FreeCAD isn't that great but using TinkerCAD with Blender has shown me some decent results and is completely free. AutoDesks 360 fusion looks nice if you have some cash for softwawre they also have a free trial where you can make 9 editable files with there cloudbased software. I have enjoyed this new device since I'm always looking to fix or upgrade things and this allows for SOOOO much more inventive creativity.It has a setting called [ Silent ] too, which slows the printer down to silent volumes which is very awesome since I live next to persnickety people in apartments. It won't turn down the "travel" speed that much so the setting will need to be adjusted inside Creality print advanced settings if true silence is needed since it has insanely quick and efficient motors. It has auto leveling/calibrations, Lan and usb connectivity if you don't trust Wifi and I don't in apartments. It's easy enough to mess the prints up let alone having wifi hackers interrupting file transmissions..I've heard and seen lid risers are needed to print Carbon Fiber prints due to the angle of the Bowden stock tube... ASA makes a good filament for the risers since its high working temp, rigidness and resistance to chemicals like those emited during prints sometimes. Since starting I haven't had to do much of anything to make it work soundly (since I haven't used CF filaments yet) and that is awesome! Make sure to use glue stick. Customer support is responsive for any needs and many videos online to help replace, upgrade, install, and maintain the device.I used the original plastic off the sides of the machine to help create a better seal on the front door (looks ugly but it's free and came with the machine), this keeps everything nice inside when printing and lowers the dB volume outside. Make sure if you decide to upgrade the back fan that you use a DC24v fan. You can place a piece of active carbon filter where the original fan once was... I also put a 5lbs sand back on the edge of the top of the machine which reduces vibrations and movement of the machine when travel is going fast... Don't place it in the center or you will scratch the bottom of the plate like I accidentally did... Risers would have stopped that but I haven't finished them yet...an old tooth brush with either isopropyl alcohol or water works really well to clean the build plate rather than using rags and having to wash them... plus if you do it right you can use the old glue and just make a nice finish with just a little water and effort.

I have bought and used Creality products for years. My CR10 V3 plus was starting to show it's age so I ordered this Ender 3 V3. I am impressed with the software, speed and print quality. This thing is so fast and quiet when compared to my old CR10! Use the online assembly instructions, your eyes will thank you for it.

UPDATE - I figured it out myself when I disassembled the product. The ribbon connector from the screen to the PCB wasn't connected. This is a huge miss from their QC, as I doubt this cable would've wiggled itself out during transport. After I connected it, it started printing.After about 3 prints, the nozzle jammed. Again, being somewhat technical I was able to completely disassemble to nozzle and remove the jam. I would advise users to retract the filament after each print if you anticipate a few hours or a few days between prints.---------------------------------Would give it a zero star if I could, the power DOES NOT WORK. Set up is not terrible but it simply does not power on. Happy to give it a higher review if they can QUICKLY resolve this issue, but as it stands I needed this for work and it hugely disappointing.

This printer was a bit expensive for my tastes, but it works very well. My only complaint is that when the filament runs out, it's a pain to change it. It's a little loud, the nozzle seems annoying to change compared to my Ender 3 v2, but the bed leveling, automatic z-offset, and enclosure make up for that. Another complaint of mine is that the tools that come with it don't have a dedicated space, like on the Ender series of printers. I'm also not impressed with Creality Print, which is basically a modified version of Orca Slicer. Orca Slicer is a better option, but be careful where you download it from because there are a lot of fake websites serving malware. The official source for Orca Slicer is Github, just google SoftFever/Orca Slicer and you'll find it.

I have been having a great time printing on this for the past six months. I am usually bad with electronic but this was super easy to set up. I have had no major issues with using the printer, other than a singke clog. It also very durable. The noise level is fairly quiet compared to other printers I've seen. I would say this is a great option for those who want to learn how to 3D print.The only negative is the smell. sometimes when printing you can smell the melted filamen, so I would suggest using it in a room with good ventilation.

Great printer, however I would recommend upgrading the gear box for the drive extruder to all metal. Otherwise, its a great machine. Build volume is good, noise is a little loud, auto leveling, and accurate. Setup was a breeze and its a good buy.

This printer is super fast and the print quality is great once you dial in the settings. The enclosure helps with tricky filaments, and the AI features are a nice bonus. Just needed a bit of tweaking for perfect results. Still one of the best in its price range.

This is an amazing printer! My son loves it! However, this is the second one I bought in 2 months. The extruder broke on both of them. We did reach out to the company but they are in Beijing. They are hard to connect with due to the time difference. The second printer broke once before and they sent a refurbished extruder. Now that the replacement extruder broke, I no longer have faith in this printer! It was a graduation gift for my son and he graduated in May! I do feel it's worth a try but be mindful of the extruder!