Rust-Oleum203000 .6-Ounce Specialty Brush Bottle Appliance Touch Up, White, (Pack of 1)

The “Rust-Oleum 213174 .6-Ounce Specialty Brush Bottle Appliance Touch Up, Black Glossy” arrived promptly and was better than described online.PROS: (No CONS observed.)* I chose this high-quality, dependable Brand “Rust-oleum Black Glossy Appliance Touch-up” to repair a large chip measuring 3/4” x 1-1/4” on the front edge of my black porcelain stovetop.* EASY-to-USE with PERFECT RESULTS!Appliance Touch-up can be applied to metal, porcelain and enamel surfaces. It is a quick-drying acrylic lacquer that provides a long- lasting , high-gloss finish.* Quick-dry feature makes it useful on daily used stoves, refrigerators, washers, dryers, dishwashers and more.* Apply on exterior surfaces only in places where temperatures do not exceed 200°F.* Use in well-ventilated areas - open the windows during use.* Instructions on the back of the package are easy to follow: Begin by shaking the 0.6oz bottle to mix contents well.(1) Clean the scratched or chipped surface with soap & water. Dry thoroughly. I applied a final wipe with rubbing alcohol after that.(2) apply Appliance touchup in even strokes using the tapered brush attached to the bottle lid.(3) for deep scratches or chips apply multiple layers.(4) allow to dry for 10 minutes between coats.(5) for best results allow to dry overnight before use.(6) while still wet, clean up any excess or mistakes with lacquer thinner, rubbing alcohol or acetone.(7) Extend the brush strokes slightly beyond the scratch or chip for best results.* My stovetop is covered with a large Amazon Silicone rubber protective mat. This mat protects the stovetop from spills and droppings from the microwave directly above the stovetop. However the edges of the stovetop are not covered by the mat. A dish fell from the microwave causing the huge chip on the stovetop’s front edge. Dependable Rust-oleum to the rescue!* Manufactured in the USA 🇺🇸!Enjoy your newly repaired appliance!Highly Recommended.

Relatively simple process, like painting nails with two thin layers. Good enough result, see picture.There's a large chip in this range's enamel and the dark steel was bare. Previously used another epoxy claiming to fix it, looked like we put a chewing gum on. Terrible. So we scratched it off again, carefully, with a cutter and used this on the now slightly bigger spot.One thin layer started throwing waves when we tried to wipe the edges thinner with isoprop maybe 30sec after application. Removed the entire, half-dried layer again, an easily job with cottonball and acetone. Started over.Two thin layers, maybe half an hour apart, make our formerly obvious damage truly inconspicuous. Not invisible on close inspection, color is slightly mismatched and surface at interface shows a bit. But looks great from a normal distance and draws zero attention. Tries super hard, but could be gently smoothed with knife edge. Will last the appliance's lifetime. This, chewing gum epoxy, is how to do it.Optically the unit is ok, it won't rust and the bottle's almost full. We's also treated spots on other appliances now. It's a little like nail paint. New appliance vs this? Good value!

I bought this to touch up a scratch on my washer. It did the job and the color was pretty close to an exact match. Not sure if it leaked because there was silicon material inside the packaging. I think it is there to keep the bottle from moving around because the silicon material was clear in color. When using make sure you don't let the brush get exposed to the air too much as it appears the paint dries up pretty quick. I found this out when applying the paint. By the time I prepared myself to apply the paint it pretty much had dried up so some of my paint strokes did not come out smooth. Also, it doesn't appear to be too much paint in the bottle as I had to completely submerge the brush into the bottle to get paint on the brush. Overall, the scratch is not noticeable unless you know where it was and look really hard for it. I'm happy with the end result. Not sure if the rest in the bottle will be available at a later date due to possibly drying up after opening it and exposing the paint to air. Hopefully I won't have to fid out.

Easy to use, covers well, matches perfectly.

Great product. I've actually used to paint exposed screws black and around the ugly brass around a doorbell. I've used the white on a scratch on the outer edge of a porcelain bathroom sink. Stays on, unbelievable.

I rarely write a product review, but this product is amazing. I had two black show through spots on the top edge of my white stove. This product covered them perfectly! I had about two inches of bare wood on my white toilet seat. This product covered that very nicely. I even had a tiny black dot showing through my Formica kitchen counter. One tiny drop of this product and it was gone.

I bought this for my expresso machine. Although it covered the worn areas well, the paint is pretty shiny, so it is pretty noticeable where I used it. It is durable and hasn't chipped at all in a few months.

While renovating the laundry room, we pulled out the washer and switched it to the other side of the dryer. We noticed that where the washer had been rubbing the side of the dryer whenever the washer was off balance had scraped off quite a bit of paint. This rustoleum appliance touch up paint was the perfect fix. It’s not quite the same color of white, but it’s close enough that it’s not noticeable. I put 2 coats on bare metal and it provided excellent coverage. The paint is a good consistency - like new nail polish. Not too thin, not too thick. The brush applicator worked well and put paint exactly where I wanted it, no wonky fibers making a mess everywhere. The bottle is small, but i only have the two white appliances, so it should last an acceptable amount of time. In general, I feel like the price is appropriate.