Nilight RGB LED Rock Lights Kit 8 pods Underglow Multicolor Neon Light Pod with Bluetooth App Control Timing Function Flashing Music Mode IP68 Exterior Wheel Well for ATV UTV

At least 7 time i bought for my self and ( my cars - my bike ) and my friend bike 👍

اشكرا ع الاستبدال وتعاونكم مع

It's working perfect. Easy to install and operate

Easy to install, all the hardware are in the box. The APP connection and response is seamless. Light brightness is pretty good for the size of the LED.I just wish that they provide a little more instruction that if you are installing this on a pickup truck or LWB vehicles to order the extension cable/wire.

Mine stops working in less than a year for no apparent reason. No burns or break just stop working.

main controller burnt after 3 months of usage. no clear details if warranty claim is possible

Overall it was a very quick and easy install. They're fairly bright but not the brightest rock lights I've seen. For the price the quality is amazing. Highly recommend.Keep in mind you may need extensions like I did.

Desde el inicio no me agradaron, el color blancl nunca lo fue realmente, sino una combinación de colores, la instalación fue la correcta, despues de 2 meses dejo dw funcionar cuando MAS LO NECESITABA, considerando que el vehiculo lo use solo en 4 ocasiones , fue bastante mala experiencia, no lo recomiendo!!!

No me gustó que porfin las conecte y no se ven iguales

عملية وسعرها الى حد ما معقول

11/20: I've installed two of the eight so far, one in each front tire-well, and am impressed with the results! Presumably, the light will be even more awesome once I finish. I will update when all are installed with more photos!TL;DR: 5/5 stars, would recommend.Better than expected build-quality for import light kit. Each "Puck" has three committed Diodes (one red, one green, one blue), which give bright, three-tone light. Simple to Install, but you should know how to wire switches and accessories to the battery and run cords. These work great as a silly and fun gag for my stock-height pickup, and I imagine a proper off-road car or rock crawler would make them look even better!BUILD QUALITY:Better than expected. Light "pucks" are made of two powder-coated aluminum pieces closed with four hex screws accessible on the rear of each "puck." The front piece is a cup-shape, so the only seam is along the rear side, which would sit flush against the silicone mounting pads. Each light comes with mounting hardware (hex bolts with tiny nut - depending on install, you will need to supply your own washers). Cords are thick and seem durable; I ran them through plastic looms just in case. I don't like to tempt fate, so I made sure to run a bead of silicone around the back panel and lens of the light "pucks" to avoid water intrusion. I don't know if there are gaskets on the inside, but since these are mounted to the undercarriage, I figured I'd take the extra precaution.The lights' controller is a rugged plastic box; I have mine mounted under the cab of my truck, and I've had zero issues with Bluetooth connectivity or responsiveness. I'm usually suspicious of Bluetooth versus a dedicated remote, but I have to say this one sold me. There is no need to hide an IR receiver, and the Bluetooth lets me control them from inside and outside the car. Bluetooth works better than others I've used with similar products.INSTALL:Straight-forward, but you should be comfortable with simple wiring, including running power and adding a switch, as there are no instructions provided. Don't let that scare you off if you're a total beginner; It's a straightforward kit, and you can get everything you need to know off a few youtube videos. Also, note that the kit does not come with a wiring harness for attaching these to your car or a switch, so you will have to provide those on your own. I've used Nilight's wiring harnesses for a couple of other installs, and they're easy to use and good quality for the price. For this install, I ran my own wires to an auxiliary fuse-block I installed for accessories.The lights each come with two silicone "pads" for mounting them to the frame, one for flat surfaces and one for curved surfaces. The lights have a wire protruding from the rear, and the pads have channels for running the cabling straight through the pad or off to the side in two directions, so it's very modular for various types of installs.Note that each puck has about ten feet of cord that you need to install into a central hub; this means that depending on your application's size, the hub may need to be in the center of the undercarriage to reach all your pucks. The hub has rugged connections with a water-tight screw-on cap, which should be good for an under-carriage install.Nilight may sell extension cords - I'm hoping they do as larger cars will need the added length.THE LIGHT:Bright and awesome. These have three dedicated LED's per puck - one red, one green, and one blue. They create colors by mixing different amounts of each light, which means they're quite bright. This also means that you get a "three-way color shadow" where the cast light edges miss each other. You can see this in my photos above. It creates a unique effect that I really enjoy - but you should be aware in case that's not what you're looking for.They can cast every color in the spectrum, which is really cool; keep in mind that since these are additive RGB LEDs (as opposed to RGBW's with a dedicated "white" LED), they make color by mixing the light of all three. This results in white light having a blue-purple hue. Not a deal-breaker, but be aware. Other colors are presented well; you may have to fidget with the spectrum color-chooser to get it precisely right.Importantly: These LEDs have a "memory" function, so if you set the color and turn them off (via a hard-wired switch or via the app), they will be that color when you turn them on. This is a really cool feature and makes flipping them on at a moment's notice possible. Very handy and very cool - this has been a pet peeve of mine in cheaper kits.THE APP:IMO, this is good but not great - and I hope Nilight adds the ability to create custom colors to the music/mic and pre-loaded programs in an update! Regardless, here are some of the features:- It has a "fixed color" option with a color wheel where you can select any color you want, which is very cool. It also lets you use an image on your phone as a "palette," which seems to give you the "overall color" of an image. Sadly, I don't believe you can set your own "custom" colors - though I may not have figured this out yet.- It has a "music match" option that can play and sync the lights' movement to music on your phone. I use an iPhone, and it appears that to use this effectively, you have to have songs "synced" to your iTunes (and presumably apple music) library for them to populate in this list. Sadly, it seems the only color option for this mode is "rainbow," and it flashes through the different colors.It has a "mic match" option that syncs your lights' changing colors to the mic input on your phone. Effectively what this does is let you play any music in your car and sync your lights to it (or any other noise in your car, I suppose). Sadly, it seems the only color option for this mode is "rainbow," and it flashes through the different colors.- It has several "pre-loaded" light flash/strobe modes - rainbow, single colors, a few pairs of colors, etc. You can control brightness and speed. Sadly, it doesn't seem you can create your own custom programs. I'd love to have the ability to make the lights flash two or three colors of my choosing.- It also has a timer setting - which seems to let you program the lights to turn on or off at certain times or after a certain amount of time. I haven't used this much, but I imagine it's helpful if you want them to stay on for a few moments after you turn your car off or the like.- It also has a "shake" feature that changes the lights to a different color if your phone registers a "shake." I imagine this is handy if you're offroading and want to see the bumps in the road in your lights, and it can be toggled on/off.THE WRAP-UP:These are great lights, and I'd recommend them, with the caveat that these are designed as "rock lights" and not "underbody" lights for your local car show. They cast big, bright pools of light, but the light is localized and meant to highlight the car's features and illuminate the terrain below. They will work better the higher your car rides, so if you're looking to have a big soft pool of light under your car, go with strip LEDs instead of these. If you're looking to shoot light into a cool part of your lifted ride or highlight big tires, cool frame details, or hide a light behind the grill - these are excellent.