LINKUPFlexible SLI Bridge GPU Cable Extreme High-speed Twin-axial Technology Premium Shielding 100ohm Design for NVIDIA GPUs Graphic Cards - [4 cm]

Works like a charm in the NZXT H1. I was worried that it would be too short, but my concerns were unfounded. RTX 3070 now has the space to stretch its legs, thanks to this Gen 4 riser! Well done Linkup, its a great product.

Has not performance degradation or compatibility issue. However, make sure you see the chart to fit your PC case, I used it with an Nvidia RTX A4000

After many failed attempts this Riser cable really does work on a PCI 4.0. Thermaltake cables no so much.Test rig:Asus Rog Dark Dero Crosshair VIIIAsus Strix 3090 OCAMD 5900X

This cable seems designed for very specific screw placement on the motherboard. Mine has that screw 1cm further from the back panel, and so the card isn't fastened to the case. They coud've made the mounting board a bit longer with more screw placement options (and perhaps a perforation to break off any excess). This would make it perfect.

Definitely working on my systemOrdered a 250mm Riser PCIe 4.0 CableAsus ROG Crosshair Hero X570Sapphire Nitro+ RX 5700XTPhanteks Evolv XCreme - UAE

Worked perfectly. No issues combining it with a Phanteks mount.

Hi, As advertised its tested with different graphics card but they did not detailed what kind of test they have performed.I installed it, as far as normal display is concerned, it worked fine. As soon as i started CSGO (Game) session, display hanged after 2 minutes. Had to restart my PC, started CSGO again, hanged again.Removed the extension cable, started CSGO and problem is resolved. So i think this cable is not capable of load.Regards,Mazhar

Long enough for my custom setup and works perfectly

GPU would not fit in the first slot due to being too close to the RAM. This allowed me to recover the use of a 16x slot for use of my NVME drives. No problems, getting excellent PCIE4 speeds.

Great quality and value for money. Fits perfectly on my rtx 4080. Future proofing with this gen 5 cable riser is a great choice. Easy installation

Wanted to upgrade to Gen 4.0 and purchased the 30cm length 180 / straight riser. You could possibly go shorter than 30cm but you can still tuck in the cable to close the case properly.

Card: RTX ASUS 4080 Super TUF .MB: B650I AORUS ULTRACPU: Ryzen 7800x3dRAM: Kingston FURY Renegade RGB 32GB (KF560C32RSAK2-32)It simply doesn't work on PCIe 4 speeds; the screen is frizzing/lugging and all sorts of performance issues.

I really didn't wavy to chop out the hard drive bays to fit an RX 580 card on, which is very long. It fit perfectly on both the motherboard and graphics card. I was worried about whether I was ordering the right one, but the left hand let me put the card just outside the case, upside down on a small case (temporarily) to make room for the power connection. Now I have 3 screens and I might add two more. For those using OpenBSD, the amdgpu firmware supports this card.