TW25B Premium Firearm and Gun Grease 4-Ounce Tapered Tip Tube, Synthetic Lubricant

Best bolt grease i know of. Not thick and stickyBolt glides smoothly.Kinda big for range box so i use it to refill small tube.

First - make sure you mix it well, knead the package and shake it up before use!. Then when you spread it around your barrels and apply very little to your slides - it makes everything run nice and smooth. Best part, it kind of dry's up after a few hours, but the slip and slide doesn't go away, but the dust and sand attraction does!....

I've been shooting and cleaning guns for quite some time now and I've always used the best of the best in order to extend the life of my firearms.This grease is great for ALL guns and top firearm brands recommend it. It works well with P226R, M9, SA M1911, and Glocks (but obviously it suits all firearms wonderfully)Pros:- Doesn't run even when hot- provides great protection against slide friction from frame- Box tells you the necessary amount that should be applied for various applications (from light to heavy use)- Long life- Reliable- Gun mechanics move a lot smootherCons:- NoneNotes:- This 4oz tube's tip is sealed completely; therefore you need to cut the tip in order to create an exit for the grease- Grease will naturally separate the white compound and the oils in the tube; no worries, just knead the tube a bit before usingRecommendation(s)/Suggestion(s):- Like I said, you need to cut an opening before you can sqeeze it out; however, instead of cutting a hole, I suggest poking a hole with a fairly large needle. This way you can sqeeze firmly without having to worry about sqeezing out too much at once.- Before using the product, knead the tube a bit to have a more uniform solution of grease- Don't use on the inside of the barrel- When applying to your firearms, apply a decent ammount (an even faint white colored amount); if you see pure white spot of lube, then you applied too much; if you don't see a faint white amount, then you need to apply moreThanks for reading this review, cheers!***Update 10/13/2011***This product continues to amaze me. It doesn't dry out, it keeps my firearms running smoothly. I recently got a new AR-15 (LMT MRP CQBPS16) and I am impressed with how well it lubricates and protects all the vital parts and pieces. I highly recommend this product to everyone.

I've been using this grease nearly exclusively for the period of 2015 to about 2020. I recently switched to a different brand but I used tw25b for grease nearly exclusively for about 5 years. I used it mainly on 1911s and AR15s with a piston or DI.With that said, I find this product works really well. It is a solid product that goes on well. After I clean my rifle or pistol, I use the grease all over with a brush including the bore. I then use wipes and patches to clean off the excess. It leaves behind a nice shine that protects the metal. I then use the brush for spot greasing that I leave behind. I mainly target the railing or contact points of the rifle or pistol.Here's what I found:Positives:- It works really well on pistols and pistons. You can see the film where the bolt or slide goes and you can see it is shiny and wet.- The weapon never fails even when it doesn't look like the film is on there.Negatives:- The grease dries up pretty quick in over a week. If I look at the slide after a week, it doesn't look like there's anything on it.- On my DI rifle, after shooting I am not able to see the film anymore on the rifle.- It's pretty expensive but a 4oz tube will last you a very long time.

Great stuff!!

This is without a doubt the best grease on the market for lubricating guns. Since I discovered this grease used by the military, I use very little gun oil on my guns, and my guns stay so much cleaner than they did. Carbon and other contaminations tend not to stick to guns lubricated with this grease. It seems to be absorbed by the metal of the gun leaving it with an apparent dryness that remains slippery. Thus, it is not sticky like regular grease, and this keeps contaminants from sticking to it. I use a Dremel tool to work it into the metal, and then I use a Dremel to buff it to a bright and shiny finish. There is no metal on metal wear or abrasion when I am finished. It is like dry metal on dry metal except it is very slippery. I still have all my other oils and slide greases, but I rarely use them -- actually, I pretty close to never use them anymore.

I agree with the other positive reviewers. This grease is easy to apply a couple small dabs on the rail tracks or other friction areas and it really makes a difference in continuous operation. I do the dab and then spread with the small end of a cleaning toothbrush. Just enough to see the whitish film but not too much. After a range session I've found that the grease does not get blown out or move at high temps. I have several small semis and have found although they are picky, I experience fewer failures than before I started using this grease. I think IMO using a specific viscosity and property grease is essential to getting a high level of reliability and this is high quality stuff that fulfills the need. I bought the big 4 oz tube after using the smaller size for several months and getting sold on the product. Its worth it. I would not run without it now.

This is liquid magic!!!!