Key Fob Keyless Entry Remote fits RX330 RX350 RX400h (HYQ12BBT) 2004 2005 2006 2007 2008 2009

These set of key blanks I got worked perfectly. I of course hired a locksmith to program both parts of the process and both keys worked great.

Wonderful to save over $100 as the local lock smith wanted to charge to replace my car key.

exactly what we needed! good quality, feels OEM almost

Trash this is just the plastic case. This has no electronics to program. Avoid this product very misleading

Dosn’t work on 2007 Lexus RX350 due to this model of RX needing to be programmed by a locksmith or dealership. Maybe I missed it on Amazon, but the actual website for this key states 2007-2009 can’t be programmed manually. Several locksmiths would not use a 3rd party key, so I had to buy a key from the locksmith, which looks similar with a new lasercut portion.Note: I wasn’t aware, but the 2007 RX 350 will not start without a programmed key fob. The laser cut portion alone will not start the car. Had to have my car towed to a service shop, thinking the starter went bad. Nope, it needs the laser cut metal key portion AND a programmed key fob.

Seems to be good quality, however, to date I have failed to get the remote to work with my 2007 Lexus RX350. I had the original keys but the original remotes (2) that I had quit working. I was told that I could switch the key that I had with the blank key that was sent to be with this order and simply reprogram the remote. Having done so, I have yet to get the remote to work with my car and I have tried any information that I can find multiple times. I have attempted to call the local Toyota dealer but they never returned my call. I haven't given up yet, but I'm close.

Got it to work with my 05 lexus Rx330 after lazer cut at Lock Smith ($45)To program the key, the instruction from the seller did not work. I followed one of the buyer's comment:First, close all doorsInsert master Toyota key in and out of the ignition cylinder 4 times. On the 5th time leave the master key in the ignition cylinderOpen and close drivers side door 6 timesRemove the master key from the ignition cylinder.Verify that security light on the information display is solid, indicating that the car successfully entered programming modeInsert new chip keyWatch security light blinking for about 60 secondsWhen the security light goes out, your new key is successfully programmedRemove the new key from the ignition cylinderAnd finally, verify that your new key is able to deactivate anti-theft system: security indicator light on the information display should disappear when inserting properly programmed key into the ignition cylinderTo program the remote the instruction from the seller worked:Remote Programming:1. Begin with the key out of the ignition.2. OPEN and UNLOCK the DRIVER'S side door. CLOSE all other doors including the trunk.3. Within 5 seconds INSERT the key into the ignition and PULL it out TWICE.4. CLOSE then OPEN the DRIVER's side door TWICE.5. Insert key INTO the ignition then REMOVE it.6. CLOSE then OPEN the DRIVER's side door TWICE.7. Insert the key INTO the ignition and LEAVE it in ignition.8. CLOSE the DRIVER's side door.9. Switch the ignition to ON then OFF.10. REMOVE the key from ignition.11. The door locks will now cycle to confirm the vehicle has successfully entered programmingmode.12. PUSH and HOLD the LOCK and UNLOCK button for 1.5 seconds on the first remote beingprogrammed. As soon as you let go PUSH the LOCK button and HOLD it for 2 seconds.13. The door locks will cycle confirming successful programming. If you have additional remotesto program repeat step 12 if you have no additional remotes proceed to step 14.14. OPEN the DRIVER'S side door. Programming is now complete.

The original key case for my 2009 Lexus RX 350 had cracked. Although I had taped it with black electrical tape for over a year, eventually that gave in & I had lost, just the key fob piece ( just the buttons on the key). I ordered this replacement key, took the key fob out & put it in my original key case. I took it to a locksmith to get the key fob programed to my car & they only charged me $75, instead of paying 3-400 dollars at the dealership! Thank You!