🌊 Dive into effortless pool cleaning with AIPER Scuba S1!
The AIPER Scuba S1 Cordless Robotic Pool Cleaner is a certified refurbished device designed for inground pools, featuring advanced smart navigation, powerful suction, and four customizable cleaning modes. With a capacity of 3.5 liters and the ability to clean areas up to 1,600 sq.ft, this pool vacuum ensures a pristine pool experience while being easy to use and maintain.
Warranty Type | Limited |
Lithium Battery Energy Content | 112.32 Watt Hours |
Capacity | 3.5 Liters |
Load Capacity | 3.5 Liters |
Power Source | AC |
Additional Features | Cordless, Superior Mobility, In & Above Ground, Wall&Waterline, Smart Navigation |
Color | Space Gray |
E**A
Saving time every week.
Excellent. It really works and save me a lot of time. I really recommend it for small or medium pools. The only cons is that it does not do the hot tub but it is ok.
T**H
Rectangle pool with 90 degree angles this is the pool cleaner for you.
I have tried other vacs for my pool and they hit the edge and don’t know what to do. This vacuum is made for pool with straight edges as with fiberglass pool. Does not work on curved rounded bottom pool. Also climbs walls with a ledge. Also love setting to clean pool bottom 3 x a week without touching. Ok to leave in the bottom full 5 days.
P**L
Do not buy
This gets stuck on the stairs. It says there is a floor mode but this model doesn't have one so it stays on the stairs about 30 minutes or more It runs out of juice before it gets any of hte bottom. It only loves walls.
E**B
Cleaning speed and excellent suction of all dirt and crud.
This is awesome value for the money. Great design and construction quality. Speed and cleaning quality is top notch. Best part is pool dirt and crud is done without return to the pool filter. Pool filtering last longer before each cleaning.
J**N
So far NOT Impressed! But Customer service made it right
Not impressed with the way this works. It doesn’t know where it is and looks lost. It moves a few feet, turns then moves a few feet then turns. This happens over and over. It stays on a straight pattern cleaning the floor for a few minutes then its lost angain. Also looks like the front brushes do not lay flat on the bottom of the pool. I upgraded the software as per customer service and same thing. Pool just doesn’t come clean like my previous Aquabot. The nice thing is that it’s cordless but if it doesn’t clean good what’s the sense. I am presently working with customer service about getting a replacement but like other reviews stated it just does the same thing. As of now I do not recommend but let’s see if customer service comes through with a better machine. Spending a lot of time on emails and now shipping and packing on something that is supposed to be hassle free. If the replacement unit does the same thing it’s getting returned and going with a more reliable company.UPDATE:I received my replacement and it is damaged. The charging port shows signs of water intrusion and it is corroded. So much for quality control. Still does the wheelie thing and its also lost at the bottom constantly turning. Contacted customer service and waiting on a reply. I’m sorry I bought this and should have stayed with the more reliable brands.2nd Update:Advanced Customer service reached out to me and issued a full refund immediately and sent me a different model (Seagull Pro) to address my issues. So far the replacement unit works much better than the Scuba S1. It’s amazing how much fine grit and debris it picks up. If I purchased this unit in the first place there would have been no issues.
D**S
Thios thing will not charge
I recently purchased a refurbished AIPER Scuba S1 Cordless Robotic Cleaner, and after unboxing, I followed the charging instructions by connecting the charger to the device and then plugging it into an outlet. It successfully charged once, and I ensured the charging port was protected by replacing the cap before placing it in the pool.After completing its cycle, I removed the device and carefully checked the charging port to confirm there was no water inside. However, when I attempted to charge it again, it would not charge. Despite verifying the connections and troubleshooting, the issue persists.
L**O
UPDATED: Aiper Customer Service good, Seagull Pro works well BUT: SCUBA S1 = still only 1 star
UPDATED REVIEW (based on new pool robot: Seagull Pro pool cleaner - + Aiper Customer Service)UPDATED REVIEW:After my initial purchase absolutely not working, Aiper customer service (which is very responsive and pro-active) offered me to replace the non-functional pool robot cleaner, with a new Seagull Pro pool cleaner. This products works as expected, picks up debris, runs long enough to clean my pool (17.5k gallons) and is so far easy to handle. I would give it 4 starts, but am giving it 5 stars, just because their customer service was really trying hard to try to solve the problem I was experiencing with the Scuba S1 Cordless (I still would not recommend the Scuba...).So, overall:Scuba S1 = 1 starSeagull Pro = 4 starsAiper Customer Service = +1 extra starOverall = 3 starsI purchased this pool robot as refurbished. Initially it came without the retrieval hook and the charging port cap was not attached to the machine, which the Aiper customer service fixed by sending me the replacement items.Unfortunately, that was just the start of the problems, as the robot was never able to pick up much of the debris and leaves from the pool. The front of the machine was often floating and not touching the pool bottom and when it was actually touching the bottom and walls, it seemed like that it was basically just driving over it and pushing debris around, but not actually collecting it. The collection basket was usually only 1/8 filled, while the rest of the debris was still in the pool. After contacting Aiper customer service about this, they sent me a replacement machine, which had the same issue. Customer service asked me to update the firmware, which I did, and the problem continued. I also don't have a saltwater, but a regular chlorine managed pool - so the machine was NOT floating because of higher buoyancy of saltwater. It was just not staying down. The suction power of the impeller also seemed not sufficient to pick up average leaves and dirt in the pool.I eventually also returned the replacement machine. It was just a waste of time and I will go back to my previous pool robots from another vendor (corded). I would not recommend this product.
S**Y
Worry free helper for your pool.
This is far superior to any other device I have tried before.
Trustpilot
5 days ago
2 days ago