VWINDESK48Inch Natural Bamboo Desk Table Top Only, Matching with Electric Adjustable Standing Desk Frame, Durable, Sustainable, Eco Friendly and Beautiful(48" x 27.5" x 1") Right Angle

This review is for the VWINDESK VJ205 desk frame and the VWINDESK Solid Bamboo 80" table top, which is sold separately.----------Desk Frame [ ASIN B08CN7D36V ] :It's solid; I don't feel any swaying at all, even when I have it at standing height. The only time I can get it to sway is when I deliberately push hard enough to do so. But when typing and using it like a desk, it's completely stationary.The load capacity is listed at 320 lbs. The 80" table top weighs ~50lbs. My LG 43" 43UN700-B weighs ~40lbs. My 2 LG 32UN880-B weigh ~23lbs each. My total load is about 136lbs and probably a little bit more with computers and power adapters, which are hanging off the cable management trays [ ASIN B09Z3TW8LT ] clipped to the desk. Let's say 140lbs altogether.The lowest height is 23.6 and the maximum height is 49.3". I have my sitting position at 28" and my standing position at 38.5". This is perfect for me at 5'10" tall.----------Table Top [ ASIN B08BYKT12Q ] :It's fabulous. It's strong, smooth, cleans well with just water, and has a color similar to birch or light oak. The warm light shining on it from the desktop gives it a golden hue. It's very beautiful. It measures almost 80"x30"x1". It fits my small studio apartment (~350sqft) perfectly. Since my place isn't large, the desk serves as my dining area and my work area.The table top is big enough to keep my 3 laptops (1 PC for work, 2 Macs for personal) on top of it along with my 3 monitors, keyboard, and large mousepad. But I bought the IKEA DAJLIEN Bench, which is also made from bamboo, to hold my 2019 16" Intel Macbook Pro and my 2020 13" M1 Macbook Air and this allows most of the desk to hold other things like my dining tray or books.----------Overall :I've had this desk frame and top for ~1 month now and I'm extremely pleased with the setup. Since both products are by VWINDESK, the table top came with pre-drilled holes. Both the frame and table top were packaged well with lots of foam padding. The directions were exceptionally clear, which is odd for many products coming from China, and it came with all tools needed for assembly.I had this desk bookmarked for a very long time and I'm glad I bought it. I had a feeling that the triangular supports would make this desk very stable and I was right; great functional design choice!!! I plan on buying another one for a family member.Before you spend over $1K on another desk, which probably uses the same electronics, give this one a try. I think you'll be pleasantly surprised.

Ordered the 72"x30"x1" top. Delivery was longer by a week but It seems this was due to technical difficulties at the courier. The package arrived with damage but the Tabletop inside was not damaged as it was very well protected.The Tabletop is beautiful and very sturdy. I matched this with a frame from Anthrodesk and everything is perfect. I did have to drill pilot holes to match my frame though.The Table comes with pilot holes already drilled to match VWINDESK frames but I already had a frame.I wish I had the option in this size to get the rounded edges but I can work with this too.Love the Table and can highly recommend it.

Yes.... but....Ordered the product and while waiting got an email stating that it would not work since the "head unit" was only going to take control of 2 legs out of 3. they provided a Tracking # right away for the replacement Unit (while i still didn't receive the desk yet).unfortunately the new part is coming from "China" or close to there.... so.... this would take another 2 weeks to get here.got the desk, pretty easy to setup. and yes... only 2 legs were working. so... needed to wait for the new "head unit" control.finally got the new "head unit" and installed it.did a full resetconfigured the minimum limitconfigured the maximum limitBUTthe only way to get this done was to press the "up" button like 50 times to go up +/- 0.4 inch at a time because if i was pressing the "up" button steady (like to go at the top of possible height) the table would only go up +/- 0.7 inch and then stop and go down... further then it was before....so... i tried to press one of the "selected height" i made memory off... same thing... the desk go down, then stop... then goes up....this is really freaking annoying....did a reset again... and went through all steps again.... 3 TIMES... same thing.tried to change the "internal parameters" of the controller (where the arrows and numbers are)... to different settings..... no go... same thing...tried the Automatic Test.... it doesn't do ANYTHING...so... i have written to the person who replied to my "registration" email... waiting for their answer...if i don't get an answer soon... i know someone who will get a desk back... PRONTO....don't get me wrong, the desk is made of good quality and "Thick legs", with strong motors to support lots of weight. it also expand to have a pretty descent desk (mine is +/- 8'X7' (L --> form)). it is not "noisy" and the speed of lifting is pretty acceptable (when it work). but one thing is for sure, they need to work on the programming and Operating Instruction sheet.... which is clearly not as good as i would expect.700$ is a very good price, for a desk that works...hope this help anyone that may have the same problem.UPDATE 10 Dec 2020.-----------------------------finally got it working as needed. it appears that there is a setting that you can "close" that will prevent the "Anti-Collision" to "trigger".yes.... they do have a setting (not documented as "Anti-Collision" and without saying what it is for), that prevent the desk from stopping to go up or down if you have too much weight on it or if it encounter an object while going up or down.when the "setting" is set to "Close" (which really should be called "disabled") it will let the desk run as needed.now... the setting is called.... "Gyro-Sensor"... personally i don't think this name make sense and wrote them to call an "Apple" an Apple...SO..... "Gyro-Sensor" = "Anti-Collision" and "Close" = "Disabled" and you should be good...Update 11 Dec 2020---‐---------------------with the functionnality now letting the desk freely go up and down i can give a 5 Stars to this desk. This ( and the necessity to call a Cat a Cat were the only points preventing me from beeing confident about it.Product Support was actually very active and responsive about my request.hope this help.

I am very impressed with my new desk frame. I love the four memory preset buttons and the ability to really dial in the height of the desk in increments as low as 0.1". Memory presets survive power loss to the controller, so if your toddler accidentally unplugs your desk you don't have to worry about losing your preset. Very quiet operation given the fact it uses three motors to raise the desk. I was able to set it up on my own without assistance of another person, but I am a burly guy who doesn't always need a team lift. This thing is heavy, you might need a second person to carry it into position or flip it right side up after you have it assembled.In short, worth the money I spent on it. Would buy again.

This is a really good quality! The table is hefty and there was no damage in transport.