DEWALT Miter Saw Dust Collection Adapter, DWE575/DWE575SB Compatible (DWE575DC)

Chegou muito rápido

Was not sure if this would work on this saw but it does and provides a solution for my garage dust.

Fácil montaje, buena calidad y compatibilidad

Works great on dcs575 FlexVolt saw. The adapter has an opening for the dust chute so that the chute will still work with out a dust collection vacuum hose fitted on. When I use the hose I like to tape over the chute opening if I'm not using a powerful vac and the dust collection works even better. It would be nice if there were a cover that could be slid open and closed. I mostly use a cordless dewalt vac and that's when I use tape over the opening. Fits on to the saw easily although the drawing in the instructions shows a locating tab and the illustration isn't accurate but it's easy to figure out. Look at the saw port and look at the inside of the plastic parts that fit onto the saw and it explains it's self. There are 2 plastic screws (ph2) that clamp the 2 parts of the adapter together. One of the installation screws is only accessible from the battery port side and is better accessible with an angle drive or a ¼" bit-ratchet but I was able to install mine with a normal screwdriver handle well enough by driving with the bit at an angle in the screw recess and additional pressure into the screw recess. The part is abs plastic and seems durable enough but could be cold welded with acetone if it ever breaks. It comes with an additional lower guard lever which must be installed for the lower guard to work with the adapter as the adapter protrudes enough on the side that it is in the path of the stock guard lever. The guard lever that comes with he adapter looks just like the stock one except has a bend to angle the tab out away from the adapter. and is easy to change out with a t-25 or with a slotted bit screwdriver. The guard levers are stamped steel but are hardened and are very tough. I tried to alter the angle of the one that came with the adapter slightly with pliers but was un-successfull. It could possibly be done with a vise but the angle is fine as is. I hope this is helpful.

very-very useful