PEEM Self Filling Vegetable Oil Extractor, 90gStainless Steel Vacuum Chamber/Tube with Tripod Used to Extract from Plant Leaves,Closed Loop Extractor Vacuum Chamber Tube Closed Loop Extraction System

Nice setup. Easy to use and works great. I do wish the inlet sealed around the nozzle better. Cleanup was also very easy.

You will find that this extractor is actually the more balanced extractor on Amazon. Not top heavy at all like you would think and it holds the can with light pressure with ease. The measurements run absolutely true to scale, it will be quite tall when you have everything in place. The spool is very well polished inside and out and that made for quick easy cleaning after a run, everything just slid right out. Plenty of room for expanding this too, All I did was message him and ask he could get some parts I wanted for this to expand what I could do and BAM, a little over a week later the parts are in my hands. If you have any problems or questions like I had, you can be certain to be met with a very quick and generous response. He backs his products 100%.The 12" extractor that I got holds 50-60 grams of dry, but not crunchy dry flower with firm compression of the flower in the spool with the flat end of a cut off broomstick. Depending on the type of flower packed in it, it tops off the 12" spool with 60 grams of flower within about 1 inch of the top. Break up your flower into popcorn sized nugs and pack them down the spool firmly and you are ready to close her up, pull a vacuum and blast. I have also run 1 ounce of flower in this unit with nothing taking up the empty space in the top half and it didn't bat an eye, The unit spit out the nectar without delay. I have even managed to polish some older flower by placing a small micron nylon press bag near the bottom with a small amount of remediation compounds and the result was a beautifully polished nectar.

Great seller

Extractor works great, easy to set up and use. I had an issue with one of the valves and contacted the seller who replied the same day and sent some replacement valves as well as a few other parts. Very happy with their service!

I wanted to like this so much for the price. But right out of the box you notice how horribly thrown together it is by the manufacturer. Small things like the horrible welds on the nuts that hold the legs on, the cheap ball valves, and the sand casted aluminum clamps with all of the quality that you’d expect them to come with. All in all for $120 I expected at least a half decent product, the only “nice” pieces of metal were the blast tube itself and the cap fittings, which were absolutely filthy inside, and machining chips were still in there with them. They try and make up for the lack of quality by adding approximately $2 worth of parchment paper and a silicone mat, but that doesn’t make up for the $120 you paid for a realistically $80 product that probably costs far less than even that to manufacture. The one thing I’ll give it is it does function, but at the same price I could list 10 products that far outweigh the quality. My recommendation is to stick with glass!!!! It’s not worth all the extra money, if you really want stainless just buy the parts yourself, I can’t see these parts lasting more than a year unfortunately.

The construction of the unit was very nice and seemed pretty solid. It goes together extremely quickly and looks like would be very easy to clean.

Works great, just be careful opening the valve on the bottom. Open very slowly or it's gonna come spraying out. That is all extractors though. This one works great for me although I recommend adding a brass hose barb fitting for the bottom of the chamber. It will help keep your product jn the collection tray.

I bought this to try and make my own vegetable oil. I came across it and the price seemed right. I made the purchase and the extractor arrived fast and without any damage. The instructions were not the best but common sense pulled me through and can you as well. I put it all together pretty quickly and all the pieces fit right. I made a mistake when putting it together. The top clamp to seal the tubes was not going on right and with not knowing what I was really doing I forced it to screw tight and ended up shearing the tightening bolt right off. I did not push down the top of the tube seal and topper down enough before tightening the clamp which caused it to break. 100% my fault. I have to saw something about the customer service as well. I contacted them and let them know what I broke and asked if I could pay for a replacement piece since being my fault. They said they will send the part out for free just to take a picture of what part broke and they would send me the replacement. I was in shock, finally a company who cares about the customers satisfaction. The replacement part arrived and it was the right part and not only that they sent some more swag with it. They sent me an additional silicone mat. They have found a forever customer in me. I highly recommend for all the above reasons.