Rechargeable Par Lights RGBW 4-in-1 LED Uplights Battery Powered Stage Lights, HOLDLAMP DJ Lights Sound Activated with Remote & DMX Control for Festival Party Event Wedding Bar Church

These were great value for the money, but I wanted some that color mix. It only did red, blue, green, white, yellow. If not for that I would have kept. Easy to use. Good battery life. Seem to be great quality.

The media could not be loaded. This light has an internal battery and does not need to be plugged into work, which is the main reason I bought it, as the description says, it was fully charged in about three hours or so, I turned it on at night before I went to bed and kept it lit blue, and it was still lit after I woke up the next day, and to test it, I didn't notice it was dead until the afternoon, a full 15 hours, it surprised me a lot! Although the mixed colors will be a little shorter range, it is enough to use. I bought two more and plan to take them with me camping, it will create a great atmosphere! I recommended it to my sister and she loves it too.

We use the Rechargeable LED Par Up Lites during our weekly shows at Tiki Bars in the Treasure Coast, Florida! The beauty is, a Better Lighting Effect then the Standard A/C Par Lites! No A/C Cable to trip over! No Buzz Sound in the P.A. System due to the Lights! Every Possible combination of Lite Colors & Intensity! They last through the entire evenings show!

The media could not be loaded. The lights are very bright. The charge holds well. Put them with some moving heads and as shown you for a light show that syncs. The lights are VERY bright and has long distance for uplighting

Finally found an affordable 8-pack rechargeable lights for our church event. Package arrived on-time, opened one to test and I was sold. It was so bright and easy to operate with included remote control per light. One remote can control all 8 lights. Wow!!I plugged them in to recharge and it didn’t take long when the light indicator showed full charge. The night of the event, all went well, it made the room looked different and elegant, except 1 light died after about 3 hours. Not sure what happened when all lights were charged at the same time. It’s okay, one light didn’t affect the room too much. I will test again. I hope it’s just a glitch and nothing serious because these lights are AMAZING. One thing I regret, I should have purchased the insurance. Lessons learned. But NO Regrets on this purchased.

If you purchase this light be EXTREMEly careful when charging it. The charging port is not connected to anything other than the circuit board and the jack from the charger is very tight. I gave it an initial charge and when disconnecting the charging jack the entire socket came out of the unit. I could have asked for a replacement, but I could see the circuit connecting "slots" in the board, so I opened the unit, removed the ribbon connector going to the leds, filed the old solder from the socket pins, reinstalled the socket---and in lieu of soldering the connector, hot glued the socket in place.(the board is very thin and I didnt want to put a lot of heat on it) When I reassembled the unit, I wasn't getting a good connection, but a little wiggling got it to charge. On the outside, I put a little hot glue around the socket to add a bit of strength and take some of the stress off of the connection. I'm hoping that gives enough "help" to keep the socket in place when being plugged in and out by the charger jack. I don't know how long it will hold up. If I'm very careful with it, it will probably be OKAY, but this is far from ideal and truly inconvenient. I will try to use them to get through the holiday season, then I will probably replace them. It's a shame that something vital to the light was designed so poorly. If anything, this charging port should be the strongest part of the light, as it will be used the most often. I bought two of these, the port only pulled out on one of them, however, I did hot glue around the port on the light that did not break just for good measure. Seeing how weak the connection was, I hope the hot glue will help hold the socket from pulling out of the circuit board. Other than that. The light is bright and the colors are okay....hopefully they hold up despite the rocky start.EDIT: This is an update < I was contacted by HONGYI US and offered to replace the lights. It is important to understand, they reached out to me, and made the offer. I had no intention on exchanging the items or asking for a refund. So, it should be known they are concerned with trying to satisfy the purchaser, and it's only right and fair to let any potential purchaser know the company did stand behind the product, even when I wasn't asking them to.

I got the 8 pack and 7 worked great right out the box. One did not. Tried getting it returned but had trouble with Amazon. Seller contacted me right away took care of the light and sent me a replacement. Extremely pleased with their customer service and so far loving the lights.

A bit noisy but does the lm job fine. Bulky