FH Group Ultra Comfort Highest Grade Faux Leather Full Set Cushion Pads Car Seat Covers for Front and Rear– Universal Fit for Cars Trucks & SUVs (White/Black)

I got the front seat covers about 5 years ago and finally decided to get back seat covers. Nice to know it's the same premium quality. They fit nicely in my kia soul. Again great quality, comfortable, and definitely make my old car look nice on the inside. I also like how the side upper seat covers zip to the middle so if I ever needed to fold down one car seat all I would have to do is unzip that section.

These are very nice, HOWEVER, SO DIFFICULT TO INSTALL. However, does not fit the QX60 2023 well as stated that they will fit. I am returning them because it does not fit snug over the seat. Also, the back row is very sloppy because they are too wide for my SUV.

I had first ordered these in beige. When I received those, they looked more like a light cream and I did not like the look as they really stuck out as being non matching seat covers.I returned those and ordered black. As my interior is black & beige, having the seats & covers in 2 colors I think looks pretty well, at least from the front. With the doors closed you don't see they don't cover the entire side of the seat.The front seat covers come in 2 pieces. The bottom has 4 elastic straps. The back has 2 elastic straps. There are 2 large round discs per seat cover & only 2 metal hooks per sear, not 4. For the back you hook the rear elastic straps from the bottom & back together. The instructions shows these round disks against the back of the seat. I guess this would be ok for seats that never fold forward. They also don't provide enough rearward tension for the gap not to show. I ended up using 2 short bungee cords to grab these discs & pull them under the seats so they are not visible and you don't see a gap anymore where the back & bottom meet. As there are only 2 included clips, I used those on the 2 front straps to hold the front down & tight. I am not using any on the sides.The surface is not as smooth or slippery as real leather. These also have a little padding and a texture to help keep the covers from slipping around. Although they do cover the top seat release, you can still them (not like I have passengers very often in the tiny rear seats).The protective plastic around the gold tone plastic medallion in the seat cover is a pain to fully remove. It would be nice if there was just a cover that peals off, not sealed in plastic.I can't use their rear seat covers as I can't get behind the existing seats to pull the covers over or around.So far I do like these as front seat covers. I don't like the design of the headrest covers so I am not using these as to me the look like a cheap wrap over the headrests as they don't cover the sides. Leaving the headrests as 2 tone I think works as that is also the coloring of the interior.

2015 Nissan Armada Platinum. Very nice seat covers. Thick and durable. Doesn’t slide around at all. On mine there was an arm armrest in the way a little. I took the armrest off and put a pin hole where the armrest shaft goes so I could reinstall the armrest over the seat cover. Made it look even better.

Purchased for a Kia 2023 forte and regret it immediately. The seats do not fit properly and the instructions are useless for my car. Instead of covering the whole seat, it simply lays over the seat and your supposed to use a butterfly disc to connect it to the top half, which doesn't work because my seats do not allow you to run anything under the backrest and then up the back toward the head rest like they want you to. consequently it fits, sort of. But if you spill any drink on the seat its getting soaked up by the rear end of the seat which has no protection because the material won't stretch that far back. SMH my bad for purchasing a universal cover ! Will also be sure not to ever purchase anything from FH Group again.

**Update: May 29, 2024I wore out my 1st set of these last summer and purchased another in June of 2023. After just 6 months, both were showing obvious signs of wear. The piping that covers the seams on the edge of the seat and seatback just doesn't hold up. I don't keep anything in my back pockets so I am surprised that just my jeans are causing this. I contacted the company, but they won't cover anything over 6 months.** Description now says it does not fit 2003 Toyota 4runner. It fits just fineMy 2003 Toyota 4runner driver's seat was starting to wear on the outside edge where I slide in. I glued some backing behind the tear and put a self adhesive patch on the tear. I had been looking for some seat covers that would be comfortable, durable, protect my existing leather and not drastically change the look of my car's interior. These fit the bill and at a pretty fair price.These covers consist of 3 pieces for each of the front seats: a bottom piece covers the seat and the front and 2 side edges and avoids getting in the way of seat adjustment controls. A seatback piece goes from the crevice behind your rear and just over the top of the seatback and has a zipper to allow for the varying size and placement of the headrest and it's mounting holes. Slide the back piece on with the zippers closed to avoid damaging the zippers. The third piece is a simple piece that covers the front, top and back of the headrest and has simple elastic straps and clips that attach under the headrest. I was originally thinking I wouldn't use these, but they fit nicely on my headrest and actually look really good.Things I really like:The seat cover material feels soft and strong like real leather and the stitching looks nice and not stretched. The gray color is maybe half a shade off the color of my existing leather and it looks great. I wasn't expecting it to match that closely. The rippled elasticized corners at the front of the seat and on the top of the back allow these covers to fit a wider variety of seat sizes without looking too loose or tight. The silicone bead backing keeps the covers in place so they don't slide around. I like that the seatback piece doesn't cover the rear of my seat and allows me to continue to use the seatback pocket.Modifications I made:There are 2 sets of straps that go between the seat crevice and connect to 2 butterfly disks behind the seat to keep the seat cover pieces taught and in place. I had trouble keeping these disks from slipping back through, so I put a wood dowel (old broomstick handle) underneath the disks. This worked great, so if you have similar problems, give it a try. About the only thing I didn't like was the oval shaped gold company logo clashes with my interior colors. I haven't seen the "gold package" since the mid nineties and I never liked it then. I wish they had done some stitching with their company logo in a gray or black thread instead. I used some of the self adhesive leather patch I bought from Masta Plasta to make oval covers for the logo. The color matches almost perfectly and I was happy with the results. Just do a search for Masta Plasta on Amazon if you have a tear you need to repair before puting on the covers and you can use the leftover scraps to make logo covers.