HONYOU Libre Sensor Covers & Lingo CGM Waterproof Freestyle Sensor Patches for Libre 1/2/3 Plus, Hypoallergenic & Latex-Free 15 Days Long Stay, 40Pack

These are very easy to apply to cover the CGM sensor properly. There's a good video to learn the process. I use a SkinTac wipe on my skin to improve adhesion and make it fail-safe. So easy to place the cover and peel off the backing to adhere to the skin. They really stick to the skin smoothly, with no wrinkles, and with no irritation and provide a perfect way to keep the sensor from falling off by some mishap. The patch is waterproof in the shower and keeps the sensor dry, too. I am almost always able to keep this patch on for the full two weeks of the sensor's life. It does not hurt to remove the patch. Sometimes I use an adhesive remover wipe to give it some encouragement to let go. Removing the patch will not dislodge the sensor (no glue where it makes contact with the sensor). Worth the money to protect the sensor and stay nearly invisible on your arm.

I bought these because they were the most reasonably priced. I am not disappointed. Works very well. Pay attention to the instructions though.

I had high hopes for the 60Pack Libre Sensor Covers, Latex-Free Medical Adhesive Patches for Libre 2/3, but unfortunately, they fell short of my expectations. While the idea of having a latex-free, pre-cut adhesive patch to secure my CGM sensor seemed great, these patches did not perform well, especially under normal daily conditions.Not Sweat-Resistant One of the biggest issues I encountered was that these patches are not sweat-resistant. I wear my Libre sensor during workouts, as well as through regular daily activities, and the patch couldn’t handle even moderate perspiration. After a light exercise session, the edges of the patch started to peel off, and it barely stayed in place. For a product that’s meant to protect a medical device that’s worn 24/7, this is a major flaw.Poor Adhesion Even outside of exercise, the adhesive did not hold up well. On multiple occasions, the patch began to lift and peel within just 2-3 hours of application. I expected these patches to stay secure for at least a full day, but that was not the case. I found myself constantly having to press down the edges to keep them from completely coming off. For anyone leading an active lifestyle or even just going about their daily routines, this constant reapplication is frustrating and impractical.Not Durable Enough I had hoped these patches would last through showers, workouts, and everyday wear, but they didn’t even last long enough to make it through a normal workday. If you’re looking for something that provides reliable protection for your CGM sensor, these patches aren’t it. I found myself replacing them frequently, which defeats the purpose of a long-lasting, medical-grade adhesive.Final Thoughts Overall, I was disappointed with the 60Pack Libre Sensor Covers. Despite being advertised as a reliable, medical-grade product, the lack of sweat resistance and poor adhesion made them unusable for me. If you need a patch that will stay on through normal activities or workouts, I would recommend looking for a more durable and sweat-resistant option. For those who are active or live in humid climates, this product just won’t hold up.

They don't last the full two weeks, but at less than a quarter each it doesn't break the bank to use multiples per sensor. Cleaning skin with alcohol wipes and letting that thoroughly dry before applying helps with good adhesion and less irritation (from trapped alcohol).The instructions for applying could be clearer, but I got it sorted out.

I am a 59-year-old female and have some experience with applying these. At this age and with MS, my shoulders have stiffened some. So, with that in mind, here is the review.Warning. If you have very fragile easy-to-rip skin and cannot handle tape on your skin after a blood draw or IV, this isn’t for you.Now on to the rest of the review.I have used two different covers. They both were the donut shape with a hole in the middle. Those work good, but applying them just right was a real pain.I have ripped a few of the sensors off with those. But hey. That’s BETTER than the pulling off 30 or 40%.I had to order some new ones and the company I used wasn’t In business anymore. . I started browsing amazing and found these clear patches with no hole. Intrigued, I bought them.The first one my husband applied failed.So, I pulled up the video for him to watch.When he was done the patch had a wrinkle or two but worked wonderfully. He watched the video for a second time with the next one.And he watched it one more time with this oath to make sure he had the ro down correctly. This is the third application.How to apply:Watch the videoVery carefully remove the first oice if paper and then lay the sticky part down and give it a gentle rub, making sure it is on the arm.Then the other side.Take your time with the blue part, one at a time, smoothing as you go.I always go back starting at the middle, rub a once around the sensor and then smooth it out in a downward motion, not a circle.The patch did not move.The sensor did not move.I stumble a lot. I have multiple sclerosis. I took a really hard fall four days ago. I Bruised my body from head to the bottom of my feet!The sensor was still intact!! That was so cool.I've showered with it, having no problem sliding a cloth hitting it and knocking it off it off.I dressed and never noticed the sensor because my clothes pulled right over the sensor.I have a seven year old grandchild who likes to rough play and give me big huge hugs. He has knocked them off before. I had No problem with this.I have no more anxiety., nor my grandson, about knocking this off!Sweating doesn't loosen itNow, for taking it off.And here is why I issued the warning above.That patch is attached so well, that when you pull it off, it pulls off with reluctance.It has not taken the sensor with it. I still have to remove it afterward. So far, to me, this receives 100%This is, by far, the best cover I have ever used.And don't worry, you will be able to scan through the plastic. It's very thin and very durable.It is so worth trying. You won't be disappointed.

Great price for the amount you get but they do not hold up at all. Mine are constantly peeling off and I have to replace them. They do not stand up to heat, sweat or water at all. The highlight is they do not stick to the sensor at all, the low light is because they don’t stick to anything