Voswitch JL300 Lower Dash Switch Panel Compatible with Jeep Wrangler JL JLU 2018 - Current and Gladiator 2020+

I was looking for a nice clean way to install some extra aux switches for the Jeep.The mopar option is way too expensive and requires dealer intervention which I refuse to pay for.This switch bank looks like stock, and fits great!The installation is easy enough and didn’t take more than about 1-1.5h (main part was cleaning up the wiring). I love that the relay box is IP rated just in case you ever have some water intrusion.The only downfall for me was that the little storage cubby seems quite flimsy and definitely is not near OEM quality. Also we have a connector behind the switch bank which isn’t connected to anything but it was stored on the original cubby in a slot so it wouldn’t move/rattle. This feature is lost when installing this switch bank which isn’t a huge deal but it would have been nice to retain this feature.The stickers that come with the switches are 3M and stay in very well, I noticed their fit is tight but it’s a bit fiddly to get them aligned properly. Removing the stickers in case you ever change you mind (like I did) is a PITA, they truly stick very well and the switch is slightly recessed inward so it’s super difficult to get to any of the edges. It takes lots of patience and cursing to get them off.Overall a great product and very happy with it and definitely recommend this !

I have read many reviews on this product and watched many videos, so I ordered it for my Jeep Rubicon.It was a stupid easy install. You get 6 light panels and each one has multiple strobe options. Can't say for long-term evaluation of this product, but for now I'm stoked and highly recommend it.P.S- I don't know what all vehicles they are making this for so I recommend going to their website to check them out.

Very good quality product. Instructions are clear and pictures are good. Components are high quality and replaceable. We installed on Jeep Wrangler JL 2020,Went through firewall to dash by drilling through knockout to right of master cylinder. Removing dash was okay, routing up into dash took time to find a path, but was fine. No cutting or drilling needed.For power, routed through wire harness at firewall, and connected Aux PDC fuse. This fuse powers on as an accessory and turns off when car is off. Length of wire for connecting to power was TO SHORT!!! and had to exit wire harness through a drilled opening, rather than using the pre-made opening.Connecting accessories is breeze. We installed a heavy duty ground wire inside the module for future connections. Switch panel (in dash) can be turned on or off as can all six possible accessories. When the switch panel is on it is lit in white. When an accessory is on , it is lit in orange. The choice of switch panel button names is not the greatest, but they tried. I was specifically adding trailer lights and under vehicle led lights, neither of which had a reasonable button icon. But no big deal.Would absolutely recommend this for the price and quality.

This switch system is well engineered and built tough. The switch panel fits perfectly in my jeep. It looks factory

Just what I needed to install my rock lights and other accessories on my jeep. Easy to wire, easy to use. Looks like it was factory installed, comes with plenty of accessory stickers. Doubt I use all 6 but they are there if I do.

I installed this product in my 2022 Jeep wrangler Rubicon 4xe. This product is very easy to install both inside and out. With the wrangler 4xe the unit that is placed under the hood must be installed on the passenger side. The switches that were installed on the inside where the jeep factory auxiliary switches would go fits perfectly. So far this aftermarket product works great with the wrangler. The unit runs a light bar, two spotlights and three grill lights and a 50w GMRS mobile Transceiver with no problem. I’ve heard some people complain that the unit is too bright when driving at night, I don’t seem to have that problem. I plan to add more accessories. For the price and if your looking to do some upgrades this is a great deal.

This is installed very easily. There was another brand of switch panel installed on our Gladiator when we bought it. It was a mess and fit weird. This one looked OEM and appeared to install easy. Both are correct. Looks way better in the Gladiator and adding accessories couldn't be easier.

I took it to a Jeep mechanic and it worked great. I loved the design and everything. After a couple months it wouldn't distribute power to the auxiliaries. I tried to reach seller, but no luck. They just suggested switching the wires to another switch and only responded at midnight. Overall, I wouldn't recommend. Probably going to have to end up throwing it away and looking into another brand. Lesson learned...UPDATEDAfter leaving a negative review, they emailed me they shipped a new one. Works great now! I love the look & so far it has been one month with no issues. I would recommend!