MySit 4 inch Work Table Caster Wheels for Commercial Kitchen Prep Tables, Expanding Stem Casters Set of 4 with Locking Brakes Fit Both 1-1/2" and 1-5/8" Leg Tube Adapter for Stainless Steel Worktable

When looking for casters for my work table I was way confused about what to get, and price differences. I bought several sets from different brands over the years and frankly they are all very similar, with some details that are different. Let me share my experience:1. does your table have a hollow base vs a 3/8 screw? My racks came with the screw, and my table came with hollow legs. The hollow legs take these expanding rubber mounts that works great is seems sturdier and easier to install2. what kind of brake? This type here the brakes are on the side, there are variants where the brakes are set over the wheels itself. The side type here seems to work a bit better, though not a big difference3. How many brakes...the price difference between sets seem to be determined by how many wheels have brakes...some set have 2 wheels with brakes, some have 4 with brake4. Weight bearing..this drive me a bit crazy...but frankly they all handle about 250-300 lbs per wheel when similar in size..despite some set claim 1000lb capacity and other 1200lb capacity per set. I happen to buy on of each and they are identical.5. Size of the wheel itself.For $50 set of 4 with all 4 with brakes...I wanted brakes on all wheels b/c some times I have to turn the table and the wheels with brake can be hidden....better to spend $6 more for brakes on all 4 wheels...and they are sturdy and work very well.

I needed an expanding stem caster for a worktable I built with SteelTek tubes and joints from Lowes. They are about 1 1/4" Inside Diameter (ID). It's a tight fit, but it works with some "Persuasion". I had to file the inside ridge left over from cutting the tubing and the top metal serrated washer on the caster. Then a little water and dish soap for lube on the rubber expanding caster stem. Used a dead blow hammer (don't use a metal hammer it will damage the wheel) and applied the proper amount of force. It slid right in after some pounding on the wheel bottom and caster base. No damage to the wheels at all. These are some TOUGH casters and a better deal than most others. Buy them.

These castors were of good quality, No surprises or disappointments. I would buy these again. its advertised size is 1-1/2 to 1 5/8. the 1-1/2 was on the stem , and the 1-5/8 rubbers were in a separate bag. So you will get both.

We love the fact that the wheelS is lockable and it will earn support all of the weight needed to be done

sturdy wheels that swivel, roll and lock easily.

These casters came quickly and intact. Price point was key for me in my decision, but the quality seems to be there. The casters arrive with 1-1/4" rubber "squish grommets" in place but with 1-1/2" grommets also in the box.Be sure to clean out the table legs and rub the rubber grommets clean before inserting them into the legs. I moistened them a bit to make them stickier when tightening them.

I had to watch YouTube to figure out how to install. You really need to tighten it for rubber to expand enough to fit snug and not fall out. I over tightened one and it got halfway on and I struggled. Works well once you figure it out but it took me a little while.

I bought these based on the amazon recommendation that it would fit a vevor table I was buying at the time. and because amazon recommended that these 2 items are often times bought together, I didnt check, assuming they would fit. they dont.I got them, I didnt check them till 4 weeks later, and lo and behold, they dont fit, and now I cant even return them.the casters themselves look good, but they are absolutely useless to me.