Household Essentials Ironing Board Cabinet, In-Wall Recessed Ironing Board Cabinet with Storage Shelves, Unfinished Wood, Oak

It is fantastic, it exceeded our expectations!!! It is very sturdy. I love how it saves space and how clean it looks being in our wall. I highly recommend you getting it!!!

This works well, installs in a snap. I had it in the wall within 45 minutes of delivery! Plenty of room for the iron and the spray water bottle most of us use while ironing.The directions leave a bit to be desired (they mostly all do these days, so this may help. You'll need the following tools to install this ironing board cabinet:Stud finderSheetrock sawDrill and bit setPhillips screwdriver or power screwdriver2' levelTape measurePencilVacuum cleanerI strongly suggest that you choose the location carefully as you are going to recess this into a wall. Be sure there is no electrical wires or plumbing pipes in the wall cavity you are installing this into. Also, if your interior wall that you have selected has studs on 24" centers you'll need to frame the opening down to 14 1/2" in order to mount the cabinet.The door attachment to the recessed cabinet is a little tricky to do by yourself, you may want to have someone give you a hand holding the door in place while you screw it in. Be sure to drill the holes into the cabinet BEFORE you install it into the wall or you'll struggle to get the door to hang properly.My wife loves the ironing board out of the way and easy to access. In addition, right out of the box it looks great on the wall.

Bought this for our new house. The builder installed it during construction. It is just the right size and does just what I wanted it to do. Nice cabinet in excellent condition. We had an outlet installed below the cabinet for the iron. It has a metal inside corner to store the hot iron if necessary. Only problem is that the hole for the bolt that attaches the board to the swivel stand was bored from the wrong side. So they had to install the board wrong side up. (Otherwise, the bolt would protrude above the board and you wouldn't be able to skim the iron over the surface without running into the bolt.) The only downside is the edges of the board's bottom are angled rather than rounded like the top side, so it will probably wear out the cover more rapidly. But I don't use it for heavy duty ironing, just what I plan to wear that day, so not too worried.

I feel real bad for my wife whenever i see her iron her clothes on whatever surface other than on a real ironing board, and the fact that our tiny house has limited storage for stuffs like full-size board are the reasons why i chose to purchase this unit.I was able to get a returned one with price discounted. Its flawless with not even a minor scratch on it. I just wished for the manufacturer to be more clear on how to mount the hinges on the main frame, and much stronger hinges rather than the part-plastic ones that looks like they wont last due to the weight of the door and the clothes hanged on the corner hanger.A lower profile design also should had been available. I understand the 3 inches protrusion to accommodate the storage of the electric iron itself. Many folks would rather store the iron somewhere else and have a better looking unit on their nice wall.My wife is happy. No longer she hunches over the bed to iron her dress on it, or use the kitchen counter.I'm giving it a 4-star rating.I recommend to check the wall studs clearance before installing (or even considering of purchasing it).

Love this! The swivel feature is perfect and I use it all the time. It holds an iron inside, which is convenient! But I have an outlet very close, which is needed. The only thing I added was a child proof lock because if you open the door, the board could come down hard, so I highly recommend child proofing this! Great quality and just what I wanted! When installed, my laundry room was remodeled down to the studs, so we knew exactly how this would line up and had to make some adjustments.

Absolute garbage build quality!!! Garbage instructions!Let's list the shoddy workmanship and design- Screw and cap nut that hold the board to the hinge bar - came stripped- It was striped because the holes weren't aligned but the factory workers that put it together just rammed it in and sent it on it's way - lack of quality control- The track for the hinge bar to move was routered out - had burn marks and wasn't chamfered off or cleaned up edgewise in any way- The interior wood seems to have an extremely thin and inconsistent layer of paint/primer- looks bad- either paint it fully or leave bare - i feel like I need to go in and paint it now- Shelves are painted but the edges are bare- again- be consistent-- The metal heat plate is cheaply stapled in and not even cut square! looks like someone was asleep at the press.- The name tag fell off right out of the box! that should have told me every thing about this sorry unit right off the bat- The door is laminated with the cheapest laminate- seems are rough and poorly finished- Ikea should have designed the instructions and the door hinges/ mounts- there's no pilot holes of any kind and the instructions have the orientation of the hinges wrong- The location (on the instructions) for the hook are completely off- If you follow their instructions- the hook will hit the frame- had to redo it twice - now I have holes on the inside of the door that I need to cover - oh and the screw snapped off while I was at it with just the slighted torque- more garbage!Garbage- Garbage - Garbage!Ikea - save us Ikea! this would be an easy win for Ikea- they can probably build it cheaper and better with holes that line up and instructions that are easy readOnce installed and after 3 trips to the big box store to get screws etc to make up for the garbage they sent me- it's finally in after a day of work (should have been 1hr tops) It does look decent though.