Hardline Products Series 200 Factory Matched 3-Inch Boat & PWC Registration Number Kit, Blue/Black - BLBKG200

the vinyl is thick and sticks really well without bubbles. it was a fairly easy job to put the letters on, just have to do a lot of prep work, this is what I did:scrape old letters with razor blade + acetone to get all the old glue off (take extra care not to scrape off your registration stickers or other permit stickers that may still be valid like I did!! DOH!!)get a roll of painters blue tape, make a long double strip with sticky side updo not peel letters, but cut the ones you need out with scissors and peel the OUTSIDE part, not the letter itselfwhat you end up with is a bunch of squares with the vinyl letters still attachednow stick the squares to the tape white side down so you're looking at the lettersI did this freehand since you can use the squares as guideswhen you have the letters attached, make another double strip of tape and this time attachthe tape sticky side to the letters themselvesmake sure the surface you're attaching to is clean and dry, now peel back the tape from the white/rear side to expose the glue on the letters. it will come off very easily leaving just the letters attached to the tapeclean boat surface with alcohol to remove residuenow apply the letters to the boat and spend some time rubbing on the tape and letters to make sure letters stick to boatnow carefully peel off the tape from the surface, after that you can use a rag to rub the letters some more to make sure you get any bubbles outdon't use a credit card or anything hard, you'll scrape off the protective finish and mess up the smooth vinyl surface

AZ #S FOR my boat. EZ to install, look great

High Quality but wrong color match

These worked well as title number stickers we needed for our Jet Ski's. The sticker's stay good on the boat and the colors are unique looking.

I decided to replace the registration numbers on my boat. These looked like a good product so I ordered them. They come nicely packed in a clam shell package. They are 3 inches tall. The vinyl itself is on the "thin" side - I thought they would have come a bit thicker. On some of the numbers/letters I needed to use, I had a hard time removing them from the backing because the backing was cut when the letters/numbers were cut. On some other numbers/letters, the vinyl wasn't cut all the way, so I had to pull a bit to get them to separate. Due to the "thinness" of the vinyl, I was afraid that I would stretch or distort them. Luckily I didn't or I don't think I did. The product was easy to apply. They look good on the boat. I gave them 4 stars due to the issues with the cutting and thinness of the product.

Looks good

Easy to install looks great

Works very well