ASUS GT501 TUF EATX Form Factor Gaming Case, 3 x 120 mm Aura RGB Fans, Tempered Glass Side Panel, Metal Front Panel, USB 3.1, Front and Top Reserved Space for Radiators

Excellent space, the fans at the front are pretty powerful, sucking in huge amount of cold air. The 140mm at the back as an exhaust fan rips the heat out generated by CPU and GPU.Set up was easy, the brackets are installed for ATX already, so a simple swap took about 30 mins. The cable management is fantastic. My cables are messy as new ones are on the way, but currently there are brackets at the back, Velcro straps and sections for attaching ring ties.The PSU has plenty of room to breathe. The dust filters are fantastic and have no restriction on air flow.With x3 Fan GPU and AIO 380mm cooler, this case remains cool inside. The only hot spot is by the GPU which I can feel in one strip on the tempered glass. That's not the fault of the case, my GPU is quite demanding and OC so it can be mounted vertically if you desire.There is space to install your AIO rad at the front instead and use it to pull cold air through to cool the CPU and mount the 3 120mm fans to pull cold air in the top. The exhaust fan is more than adequate to handle this.My OC 5gHz CPU runs at about 75-80c when melting on Ultra spec games (rust in ultra), GPU at about 75 also. This can be brought down by swapping the fans, but my GPU will increase slightly.I won't be swapping my case for years now. Asus have built a beautiful case with solid air flow, it deserves its slightly more premium price point.

I find this case is great, I wanted a larger case to be flexible with future builds and wanted good quality materials to be used and this case ticks all the boxes.If you have little space then this case might be a problem, it is big. The space inside is ample though and makes fitting easy. Four case fans are included, I linked the RGB connecctors to my motherboard and now they are syncronised with the graphics card and light strip. The rear fan is not RGB though. The RGB on the fans are 12v so if hoping to connect to your existing 5v it might be a issue but a separate RGB controller is included.The panels on this case are also very well designed, they slot into the bottom of the case and are easily removed with two thumbscrews holding them secure, and rumber damping pads are on the screw plates eliminating noise and rattle. The only minor criticism I can make is that the PSU shroud is made of plastic, this doesnt become obvious until you remove it though and does not reduce the visual appeal of the PC when complete.If you want a large case, with RGB fans and tempered glass side and high quality materials used this case a good choice.

Lets start with the Pros:High quality build no denying that, it has a hard/sturdy feel that you would expect from a case.Plenty of dust filtersA crazy amount of room you would have no issue building within this case if you have big hands.Captive thumb screw for side pannels are a godsend. And that Tempered glass though, who wouldn't want it.Cooling opitons, well you have plenty of options pick your poision.Cable management is on point, you have 3 velcro strips included with the case, but what makes it better is the PSU shroud. Speaking of the shroud there are cut out in the shroud this is for feeding your GPU cable, took me forever to figure out why they would do that and it makes total sense why.GPU Vertical mounting bracket if you want to get fancy.Velcro handles for the case, the one thing i never knew i needed in my life!Front SSD Mount.....Noice.The dreaded Cons:As i mentioned above Front SSD mount, so i have 2 Samsung SSD's and the way the mounts are done the lables are upside down, not a major issue but why make a case so good just for that to let you down. (enless i have messed up somewhere).PSU Shroud, i feel they could of made a cut out section for the PSU shroud if it have an oled display PSU. If you have an oled display PSU you have to removed the shroud completly and boy your cable management better be on point otherwise it just going to look nasty.Overall:This case is awesome, High quality build with many features and customise options for any gamers/PC Users needs at a very reasonable price.

The goods: 1) Amazing looking, stylish tower with aggressive look and metallic finish.2)The build quality is fantastic even the parts that have plastic are well made and sturdy.3)Excellent space for a big mid tower. Actually it has more space inside then the big tower i had before fromCooler Master. The reason behind this is that there is no bracket for disks in frond of the tower. The disks are aligned vertically inside and to the side panel which it makes things much easyer and leaves a lot of space for other things.4) The grips look amazing as well. I was worried about that but those look amazing.The bads:1) Not a big problem but, I noticed that they did not add rubber pad on the rear feet but they have added on the front ones. Why Asus? I added my own and problem solved.2) In order to change the front fans when needed, the front panel has to be removed. I would prefer the front panel to be like a door with magnetic enclosure but....3) The RGB led controller is a dissapointment as it does not keep settings you specify after sestarting machine and you need to access it all the time to adjust the default one which is annoying and changes colour every 2 sec. You actually need a compatible TUF Motherboard in order to controll the leds with the provided controller. For a solution i suggest the Cooler Master MasterAccessories RGB Fan Controller which worked fantastically in the case. It has also strong magnet base to attach wherever you want inside the case.https://www.amazon.co.uk/gp/product/B071JY88NX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1That’s it. Just go for it as it is a value for money tower, which will serve and the most demanding Enthusiasts in my opinion.