J-B Weld50112 ClearWeld Quick-Setting Epoxy Syringe - Clear - 25 ml (3 Count)

Excellent epoxy, easy mix, crystal clear, superior adhesive for plastic (in my case).The problem with most of these dual tube epoxy products is that the end cap does not fit tight and the epoxy quickly goes bad. JB Weld uses a screw down cap that avoids this issue. Simple fix, great product - the only tube epoxy I will purchase from now on.

Worked for the projects we needed it for. Easy to use and convenient to save for future use

I noticed a small puddle on the floor by the toilet so I took the tank off and replaced the old gasket and the dried out rubber washers on the two bolts. I put it back together and filled the tank and flushed and it still leaked.I took it apart and looked closer and saw some very fine dark lines radiating out from one of the bolt holes. The toilet is probably twenty years old and might have had some vibration that cracked it.I bought this stuff and wiped the inside of the tank then waited for the inside of the tank to dry.It has a plunger with two tubes separating the two components and a nice resealable cap. I put on a pair disposable gloves and put a bead of glue on the bottom of the tank. I used my fingers to mix the glue and spread it around the bottom of the tank. I used almost all the glue.I let it dry over night to make sure it had set. Then I put the tank back on and filled the tank and flushed. No leak.Great product and it saved me from having to buy a new toilet.

I’ve used three of these so far. I like it when you don’t want to mix a large amount of epoxy. I used it to fill a knot in my live edge desk and it worked perfectly. Mix the epoxy, fill the knot, plane and sand any elevations, then clear coat. I did have some opaqueness in a seam, but it’s hard to tell if it’s the epoxy or there’s a trapped bubble. I’ll keep using this product for filling wood knots.

Nothing poor can feasibly be said about this product. It gets rock hard, it mixes super easy, and it adheres to basically anything that is tangible.Perfect for the broken sugar bowl lid, piece of wood, tractor, or otherwise

After buying a one-pack, I just get a three-pack. This stuff is great. From mounting electronic projects to fixing broken ceramic figurines, this stuff rocks. As others mentioned, it does give off a strong odor until set. What I do is set up in the bathroom, close the door and turn on the exhaust fan. Glue what needs to be done, then leave keeping the door closed with the fan on for an hour or two. After that, the odor is gone and the glue is fully set.

Easy to use epoxy mix. No guessing on how much to squeeze. No more messing with 2 tubes. Must have for around the house quick fix.

This is my first time buying clear Jb Weld. Previously I got the grey 6 minute stuff. This says it has higher strength. The grey works great and I expect this will too. Keep some on hand, you will find any number of ways to use it. Great product. Love the resealable cap. Lets you use it multiple times. Remember to clean before you reinstall the cap.