X AUTOHAUX 4 Doors Central Lock Locking System Car Keyless Entry Kit with Actuator - Only for 12V Vehicles Central Lock with 2 Remote Control Key

I used this AUTOHAUX keyless system to replace a 20+ year old system that had quit working in my 1970 GMC truck. The wiring was the was same, down to the colors of the wires. Even the new actuator mounting hardware was the same as the old actuator hardware. I just cut the wires off at the old keyless module connector plug and spliced the new keyless module connector plug into the existing harness. Everything works fineThis new system uses one 5 wire lock actuator and my old system used two 5 wire lock actuators. There doesn't seem to be any physical difference between the new and old actuators. So I didn't need to replace my existing lock actuators. By having two 5 wire actuators I can lock all doors by manually locking either door. With the old keyless module, the driver's door lock actuator would not unlock the door. Just by changing out the old keyless module with the new keyless module got the driver's door actuator working again.The range on these remote key fobs is great. I can lock or unlock the doors easily over 50 feet from my truck.

fairly easy to install if you have just a bit of knowledge about electronics it’s less about understanding it and more about routing the wires

Installed in an extended chevy express van.Recommend watching youtube videos to go over the install, but it was not bad if you know how to wrench on cars.Other notes:* The master switch will lock/unlock the rest of the doors. So if you lock the drivers door, the rest of the locks will lock. And if you unlock it, all doors will unlock.* The manual locks are a little bit harder to lock/unlock now, but I am still able to lock & unlock with a key* The wiring harness was too short for the side & rear doors of my van. I needed to get an additional 22 feet of wire to complete the installation.* I have no idea how to hook up the flashers and horn/siren. The instructions didn't really provide any insight into how those leads would work. I guess I could have used a multimeter to figure it out.* I lost one of the actuating rods during the install. I was able to get a replacement from a local car audio shop for cheap.* I used loctite on the actuating rod clamps, don't want those rattling out* I tried to line the actuating rods as close as possible to original lock rod. One I had to bend slightly to get good fitment.* The locks seem to work well. All doors lock and unlock easily. Time will tell.UPDATE: June 2025, Still working well. I took a multimeter to the pink (turn signal) and yellow (siren/horn) leads. Both leads seem to be signaling 12V (not ground). 1 pulse for lock, 2 pulse for unlock.

Long range good quality and good remote response easy install wires are a little bit to short for a crew cab but great for a single cab

I was looking for a kit for my cable-driven door locks for my 2004 civic dx. Everything I've tried has failed to do the job. I've ruined a few sets of cable locks attempting to use a "traditional universal style" lock kit. Nothing worked & I was left scratching my head."Why not just try the standard locks that come on higher trims, I thought?" If this did not work, surely I was at a dead end. The process for removing the door lock mechanism was a bit laborious, BUT the dx trim does have the ability to utilize the factory lock motors, they just were never added due to being a base model!! With those installed, locks wired up & even going so far as to use a factory door handle/lock combo it all worked!!At last, power locks were had & this simple little kit helped immensely.

So I bought and installed this in my truck in October of 2024 and yeah it doesn’t come with any instructions on how to install it but that’s not the worst thing so about a month ago all of a sudden the doors would unlock after I had walked away from my truck now they won’t even work at all and I have done everything from replacing the batteries in the key fob to hooking it up to a different power source and every time you take the fuse out and put it back in the door locks will cycle but it doesn’t get any power to the brain so do yourself a favor and steer clear of this company

My door locks freeze up every winter and it was getting difficult to unlock the door. I searched YouTube for directions on replacing the locks but found videos for this keyless entry system. Not going to lie and say it was easy. Installing these took a long time but wasn't too complicated. This was well worth the cost and effort to install.

After having to make several more purchases because this didn't work with my specific truck, I somehow MADE it work. Honestly, this kit probably works wonders for certain vehicles, just not mine (a 2nd generation tacoma) The only things i really kept put of this kit was the ECU, wires and the fobs, all of which are still currently working fine. The actuators and brackets just would not work on my door frame as-is. If you're not 100% confident in your mechanic/redneck abilities, you may fail with this. God speed and good luck