Autoxrun Engine Valve Cover Camshaft Rocker Gasket Replaces OE# 55564395 Fits Chevrolet Cruze Sonic Aveo

Well, it fixed the PCV problem on my cruze 2012 1.8L. Even when it "fits ok" it is kinda tricky. At first there was one hole with a little difference on space, so the screws did not tight. I was about to send it back, but I decided to start the mounting over that hole, in the end and after many attempts I finally installed it. On the other hand, the hole where the oil cap is placed looks weird, but there has been no leaks until today. I hope it lasts! at least two years.

Great item and cheaper than the local auto parts store. My sons car is complete.

You might think that this would be an easy part to reverse engineer, but apparently that's not the case. The bolt holes don't really line up. I tried starting the bolts in the center and working out... starting the bolts on the right side and working towards the left... starting the bolts on the left and working towards the right... starting the outside bolts and working towards the middle... yeah, the holes definitely don't line up with a 1.8L GM cylinder head. I had to discard some of the bushings around the bolts to give me a little more wiggle room, which put me in the nerve-wracking position of driving bolts into an aluminum cylinder head at an angle. Oh, and one of the E-torx bolt heads was malformed, so that was interesting to work with. Since this obviously junky valve cover includes the PCV valve, I'm not hopeful about longevity.

This valve cover fit my Chevy Sonic 2012 1.8lt perfectly, but only after driving a couple hours the engine started spraying oil through the gasket. When I pulled the cover back off to inspect I noticed the cover was already warped with large gaps everywhere but the areas around the bolts. I used a known good torque wrench so I know I didn't over tighten the bolts.I really needed a new PCV camshaft rocker, so I pulled the new one from this cover and replaced my old one with it to hold me over for a new cover. Only after a few days this is already failing me as well. Definitely not made with good material.

My Cruze was having issues with hesitation during accelerating, vibrating/shaking and sometimes died at stops. The air leak was troubleshooted down to the valve built into the cover. This fixed it.

Do not buy this is a seller selling a product knowing its defected. I installed this valve cover a total of four five times torque sequence everything perfect it's so warped it's not Square like it should be it is the most defective valve cover I've ever seen holes match up valve cover will never seal.. spray oil everywhere worst experience I've ever had with any part. Should be off the market. Unfortunately I wanted to return it but I needed to get this car in service so I took the gasket off this defective valve cover installed it on my old valve cover I had no issues did I want to pay $60 for a gasket no but I had to because I had a car blowing oil everywhere. Most embarrassing install I've ever had I've been doing this for 15 years I've never seen anything so messed up.

No issues easy to install and fast shipping!

Great for the price and it was a exact fit thanks amazon