Triple Cup Car Phone Suction Mount Action Camera Camcorder DSLR Dashcam Race Car Holder Vehicle Cab Cockpit Windscreen Window Mount Compatible for GoPro Hero 11 Sony DJI Osmo iPhone Hi-Speed Vlogging

Bought two and have used the to mount blink cameras to windows, so far they work really well and are really good value for money

Two suction cups work, one of the suction cups is a bit deformed and doesn’t really stick on most instances. I’ve also had a nut fall off because of the lack of suction from on of the pads.Waste of money as the whole point is for it to stick properly. If all three suctions cups were perfect, then it would have been a great product. But it’s not.

So your thinking of being the next Jeremy Clarkson or next YouTube Golden Star then your going to need a Suction camera mount in your Batman Utility Belt but which one do you go for sure there are ones that are £80ish Pounds would super sexy Anodised bits but do you really really need to pay that much out when you're starting out or anytime for that matter ?So when the FantaSeal Super TriCup drops on your doorstep or thrown if it's been delivered by Amazon Logistics :), its clear to see your getting a quality product Ok yes once you've taken it out of the Big brown Prime box first, Its packaged in clear blister style packaging that is very similar to GoPro.So whats in the Package well you get the Tri Suction Mount, Two Screws, Very Solid Camera mount ANODIZED BLACK !!! WOW and lastly which I was shocked by is the Camera mount to GoPro this is £6.99 !!! alone so to get this inside the package is amazing completely worth the money.The TirCup is built extremely well and each of the suction heads are hinged making it easier to adhere to door panels and curved surfaces, they have a Suction Clamp so you push down each of the suction cups and them pull down the clamp which expels any air from underneath the suction rubber which makes it an extremely strong suction.The Camera mount is very well built made of Cast Alloy this screws on top of the TriMount using one of the Two Screws supplied it is Black Anodized which makes it look fantastic the top is a swivel ball joint allow you to almost 180 degree angles onto the end it the standard 1/4 camera screw and cushioned pad to prevent damage to bottom of camera units. it does have one cut out that allows the mount to sit flush upwards which means its great for mounting the TriCup against a window and the camera is then sideways as shown in the photos of the Supercar.It performs amazingly we put this on the side of a pro Rally car full of mud on the side we were expecting to lose our GoPro but the rally car completed a full Stage and came back with the Fantaseal mount as we left it perfect. We have used inside vehicles for Youtube videos and car reviews and it has been the perfect platform for both the GoPro and the Sony FDR-X3000r.So yes we have used the Sexy red anodized aluminium​ suction mounts but honestlySo let's get the full lowdown of this mount:PROS:- Price fantastic for £80 you get something more or less the same !!- Comes with the Camera to GoPro mount that costs £6.99 on its own!- Suction cups are independently hinged- Suction cups have Lock down clamps for extra suction- Really strong very high quality item.CONS:- No tether line to attach to vehicles (Allthough this only comes with £100+ suction units)So to conclude as you can see with the faults we were really clutching at straws the really wasn't any this is fantastic and a must for any Youtuber or videographers bag.Please click the Helpful button we spend a lot of time creating these reviews just for you and the Helpful click means nothing to you but makes my life complete :).

I figured I'd give this a go before spending almost 3x more for a well known brand of triple suction mount. The whole thing is plastic - Not a bad thing in itself but worth mentioning. The design is simple and does the job, but I'm uncomfortable attaching a camera to it again after one of the suction levers popped off the very first time I used it. I wasn't being too firm - It's just a cheap design. They pivot on a metal rod which has nothing keeping it in except tension; this means they can easily slide out of the hole on the pivot and you've lost suction on one cup.Thankfully, with 3 suckers it stayed stable, and with a bit of fiddling I managed to get it back on, but it's a design flaw. The other issue its that the body being plastic means that if you screw in the attachment too firmly it's going to crack easily.Going and the short of it is that it's actually not a terrible mount, but if you're going to rely on it to hold a valuable DSLR or Action Cam then I'm not sure I could recommend it. In some situations like this you really do get what you pay for.

I have a whole range of different action camera mounts and accessories, but didn’t have a tri-cup suction mount which would be useful for attaching my camera to my car or my motorcycle’s petrol tank.The suction mount is made from plastic, but has a good strong feel to it. At each of the 3 points, there is a suction cup fitted to a pivot, allowing you to place the mount in a variety of different locations and onto different smooth surfaces. The suction cups are approximately 6.5cm in diameter and fix securely into place using the locking lever.The complete mount measures approximately 20cm at it’s widest parts and 9cm in height (to the top of the ball head).A metal ball head is included with the mount, which simply screws into the centre of the mount and allows you to attach any camera that can be mounted using a standard ¼” tripod thread. The ball head gives you lots of adjustment so that you can aim your camera exactly where you want it.***** In The Box *****1 x Tri-Cup Suction Mount1 x Ball head adapter2 x Fixing Screws1 x Action Camera Mount***** Installation / Usage *****The mount couldn’t really be any easier to use.You simply use one of the 2 supplied screws to fix the ball head onto the suction mount, before placing the mount against a smooth surface and whilst applying a little pressure to each suction cup, you flick the locking lever over to secure the mount.Your action camera (or regular camera with a ¼” tripod mount), can then be screwed onto the ball head.Unscrewing the thumbscrew a little, allows you to freely rotate the head through 360 degrees, as well as move the head up into a vertical position by placing it into the cut out slot.***** Conclusion *****This is a great little suction mount. It feels like it is made of good quality materials and when fixed into place, the suction mount feels very solid.Being able to mount a regular camera is also a nice bonus, although I’m not sure I would want to mount a heavy and expensive DSLR and Lens.So if you have an action camera and want to mount it on your vehicle (or on any other flat smooth surface), then the Fantaseal mount is definitely worth checking out.