Installation- Professional Installation is recommended. You will have to bypass the OEM Ballast with the quick connector to get the Positive and Negative Contacts for Illumination Maintenance free, Waterproof , Shockproof How to Pick the Right Bulb Size?1.Check your owner's manual, the part number on your original bulbs or search "automotive bulb look-up" online.2.Refer to the "Notes". Such as: "Notes: Low Beam and High Beam(w/halogen capsule headlamps)" means our bulb fits your car as Low Beam and High Beam if your car comes equipped with halogen headlamps.Since the installation is slightly complicated, PLEASE READ the INSTALLATION INSTRUCTIONS CAREFULLY BEFORE ORDERING. PLEASE UNDERSTAND the INSTALLATION OPERATION to AVOID the UNPLEASANT SHOPPING EXPERIENCE CAUSED BY THE INTALLATION FAILURE AND REDUCE UNNECESSARY TROUBLES.D1S D1C D1R D3S D3C D3R LED HEADLIGHT KITSpecifications:1 Color temperature: 6000K/Cold White2 Material: High Quality Aviation Aluminum3 Beam Angle: 2 sides 360 degree emitting4 All-in-One Design: Built-in LED Driver and built-in Mute Turbo Fan@9000rp5 Easy installation: Same size as HID xenon bulb, just Plug&Play6 No interference on Car Radio7 No any delays to light up8 Super long life: 30000hours9 Waterproof: IP67Package included:2x LED Headlight with Retail boxNOTE: Please check if the original car Xenon bulb has a ballast before installation. If there is a ballast, please remove it first, then you can find the socket that can match the D1S LED bulb. Please contact us for any problems.Disclaimer Before you buy, make sure you have at least 2.0 inches clearance behind the headlight housing and it does not fit on anything that requires a cover or boot.
A**A
Waste of Money and Time
I bought these LEDs for my Suburban 2017 to bypass HIDs and I am a machinist myself so it was not hard to me to remove bumper and light to bypass the existing HID circuit.key notes about this product of you are buying it:*These lights are not bright enough.*The connector of these LEDs are not the same as we have in the blaster so i had to harness the wire before the blaster, so technically its not DS3 replacement.*One of the LEDs fan was not working from the day one and it end up goign off forever.*Quality is cheap and you will see screws coming off of the LEDs heat sync.*The overall LEDs structure is too big to fit in the light assembly and it gets loose time to time.Overall, I think it was a waste of money. Don't buy.
C**Z
Very bright!
Put these lights on a 2009 Cadillac escalade that came with stock HIDS. Did have to hardwire them in, but it turned out perfect!!
M**E
bmw e70 switch to led
very good product. i installed it on my bmw e70 headlight. works like a charm.
C**N
Wouldn't buy it again
It worked for first month, then i started to dimmer, and now sometimes it works sometimes it doesn't
A**W
I gave up
The install is described as piece of cake but it really depends on your car. Do yourself a favor and check how easy it is to unplug your ballast(s) before you order these. I realized I need to take apart nearly the entire front-end of my car + headlight assembly to reach the ballasts. This will vary with each vehicle of course but that likely makes for a small number of people who can actually easily install these. I returned them.
A**R
Wast of Money
I installed these in my car a month and a half ago and one already burned out. They dimmed then started blinking and went out. These are poorly made and won't last. Don't waste your on this product.
W**1
Happy with this seller
Nice LED with direct fit. Seller is very response when issues arise.
C**N
Can’t get warranty to replace after 4 months
Purchased in January it’s now May I have 1 high beam out and 1 low beam out and no way to get them warranted out
Trustpilot
3 weeks ago
4 days ago
